DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Chainsaws not listed - Gas OPE
*****************************************************
#Post#: 91270--------------------------------------------------
Farmertec G466 G444 460 440
By: Cut4fun Date: April 25, 2025, 9:32 am
---------------------------------------------------------
Stumper and sidekick reporting for duty.
48” across lower area I want to cut at.
#Post#: 91277--------------------------------------------------
Re: Farmertec G466 G444 460 440
By: Chainsawrepair Date: April 27, 2025, 6:18 am
---------------------------------------------------------
Got her stumped yesterday. G466 and G444 for the dirty work.
#Post#: 91278--------------------------------------------------
Re: Farmertec G466 G444 460 440
By: Chainsawrepair Date: April 27, 2025, 9:16 am
---------------------------------------------------------
G466 hung a ring in the transfer about 80% though the cut.
Stock afm topend I put on it after testing oem D cc one.
Spline screw M6x30
9022 341 1370, 90223411370
This part replaces… - 9041 216 1370 90412161370
#Post#: 91279--------------------------------------------------
Re: Farmertec G466 G444 460 440
By: Chainsawrepair Date: April 27, 2025, 9:17 am
---------------------------------------------------------
The outerwear and grease on seal did it's job.
#Post#: 91280--------------------------------------------------
Re: Farmertec G466 G444 460 440
By: Chainsawrepair Date: April 27, 2025, 1:33 pm
---------------------------------------------------------
Stump chunked.
Farmertec G444 even stock with their DP muffler is a beast.
#Post#: 91281--------------------------------------------------
Re: Farmertec G466 G444 460 440
By: Cut4fun Date: April 28, 2025, 6:31 am
---------------------------------------------------------
Where I had cut was higher then measured at flare of 48". Ended
up cutting 46x45.
#Post#: 91307--------------------------------------------------
Re: Farmertec G466 G444 460 440
By: Chainsawrepair Date: May 5, 2025, 5:46 am
---------------------------------------------------------
Farmertec G466 D cc cylinder stock bore is sweet looking.
Meteor piston kit.
Well that made it fun. Smoking a pork shoulder. While putting
Farmertec G466 together.
I have one very suspect aftermarket cylinder fastener. So
ordered 8 OEM ones to replace later.
Fired right up like nothing happened. She lives.
#Post#: 91317--------------------------------------------------
Re: Farmertec G466 G444 460 440
By: Cut4fun Date: May 7, 2025, 6:58 am
---------------------------------------------------------
Farmertec G466 460 76.5cc
Well let’s see how ole girl does now. Even gave a new dress.
Thanks Smittys saw shop.
Cylinder from Fabcorp , Farmertec D cc standard bore.
Dukes chain to test with from Sawsalvage.
Piston a meteor I had from a failed attemt by them making a p
for 475 2077
Been my grunt chit job saw for past 2 years when needed. One set
up uses stihl carbide chain for 20" under ground root cutting.
Used for stumping this years with 32"
Hopefully lives up to song playing as I buttoned it up. Bad to
the bone.
#Post#: 91354--------------------------------------------------
Re: Farmertec G466 G444 460 440
By: Chainsawrepair Date: May 19, 2025, 1:19 pm
---------------------------------------------------------
Tested 3 saws today using that Duke's chain to see.
IMO need a file to them out of the box but most wont bother to
do that.
Farmertec G466 460 stock with base gasket and DP cover.
Standard bore Farmertec D cc aftermarket cylinder first cuts in
maple dropped 2 months ago.
HTML https://youtu.be/TAVPq64DHkk
*****************************************************