DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Echo
*****************************************************
#Post#: 91145--------------------------------------------------
Echo 2511 rear handle
By: Chainsawrepair Date: February 14, 2025, 5:51 am
---------------------------------------------------------
Dang the new 4910 isnt even here and a guy wants to trade me a
new echo 2511PN for it.
Hmmm Dont really need a 4910 and rear handle version of 2511 to
go along with clone 2511 be nice.
Plus side he already put a Egan pipe on it too.
Echo 2511PN is this one
Also a echo 2511P too
#Post#: 91150--------------------------------------------------
Re: Echo 2511 rear handle
By: Chainsawrepair Date: February 14, 2025, 9:54 am
---------------------------------------------------------
HTML https://www.echo-usa.com/chainsaws/cs-2511pn
I ask some of the porters in my group. 2511 stock squish
About .032” or so. A gasket delete works on them but the
cylinder extension bottoms out on some of them
#Post#: 91160--------------------------------------------------
Re: Echo 2511 rear handle
By: Chainsawrepair Date: February 21, 2025, 8:16 am
---------------------------------------------------------
I traded that 4910 I just got in for a 2511PN with Egan pipe.
HTML https://www.echo-usa.com/chainsaws/cs-2511pn
Hoping brown santa shows up with it today.
8)
#Post#: 91161--------------------------------------------------
Re: Echo 2511 rear handle
By: Chainsawrepair Date: February 21, 2025, 1:49 pm
---------------------------------------------------------
Someone put my little echo inside a stihl box so it wouldn’t get
stolen on way here.
All in jest guys. :P :D
#Post#: 91163--------------------------------------------------
Re: Echo 2511 rear handle
By: Chainsawrepair Date: February 21, 2025, 3:58 pm
---------------------------------------------------------
Echo 2511 rear handle PHO weight dry 2511PN
Echo 2511 rear handle PHO weight both tanks full
Echo 2511 rear handle both tanks full. 12" 325 043 51DL narrow
kerf chain weight as used
bar chain weight
Egan pipe was already installed for these weights.
#Post#: 91165--------------------------------------------------
Re: Echo 2511 rear handle
By: Chainsawrepair Date: February 23, 2025, 12:04 pm
---------------------------------------------------------
Putting the grease around af mount outside area to stop any
fines.
Just like I do stihl hd at bases.
Works great and no cost.
#Post#: 91166--------------------------------------------------
Re: Echo 2511 rear handle
By: Chainsawrepair Date: February 23, 2025, 12:55 pm
---------------------------------------------------------
Since forgot to show grease. This is on the clone 2511 from
v-modest.
#Post#: 91171--------------------------------------------------
Re: Echo 2511 rear handle
By: Cut4fun Date: February 24, 2025, 2:26 pm
---------------------------------------------------------
If the open port clone had the 325 043 or the 3/8LP 050 set up
with Egan pipe I think it would be real close.
I run the 1/4" 043 mini micro for smooth pruning cuts. Watching
the sides of cuts the 325 043 narrow kerf is going to do this
too.
Not all chattering like 3/8LP does.
Plus gave me a chance to cut some apple wood for the smoker.
I also cut on the bigger wood their setting on too.
I will be buying the V-modest rear handle when it comes out.
#Post#: 91200--------------------------------------------------
Re: Echo 2511 rear handle
By: Chainsawrepair Date: March 13, 2025, 7:42 am
---------------------------------------------------------
So impressed with the new member of my tag team. That echo 2511
rear handle with nano 325 043 nk set up throws some dang chips
as a limber.
Used for 12" under there was no stopping it on the multiple
truck maple 5.
Used the hack ported 490 with front and rear 501 handles. No
vibrations felt like the plastic crap did.
Running the stock 18" with 23RS the new stuff.
#Post#: 91205--------------------------------------------------
Re: Echo 2511 rear handle
By: Chainsawrepair Date: March 15, 2025, 1:32 pm
---------------------------------------------------------
Dont care for the echo 2511 caps. They want you to use the T
handle. I call BS.
577878603 T435 caps in normal ending on 1 and flip caps work
ending in 3.
*****************************************************
DIR Next Page