DIR Return Create A Forum - Home
       ---------------------------------------------------------
       Chainsaw Repair
  HTML https://chainsawrepair.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: How To Basics and Fixes
       *****************************************************
       #Post#: 90788--------------------------------------------------
       Echo decomp plug 
       By: Cut4fun Date: August 13, 2024, 6:03 am
       ---------------------------------------------------------
       Just goofing around to see if I could make a echo decomp plug
       cheaper then 14 for oem ones.
       2 bucks and just a hacksaw and grinder.
       You folks with real skills could do it better. M10x1.25.
       The aftermarket M10x1.00 there for scale with echo decomp.
       I didn’t source a 10mm copper washer local. So used a brass one
       for now testing.
       Works on echo 501 4910 590 600 620
       #Post#: 90850--------------------------------------------------
       Re: Echo decomp plug 
       By: Chainsawrepair Date: September 9, 2024, 11:45 am
       ---------------------------------------------------------
       Forgot to update copper washers.
       Do not do like some  ::) did and try to put the $2 cheap afm
       plugs in with wrong thread pitch 1.00. It will ruin cylinder
       threads for future use. Yes there is  ::) out there that did
       that.  :D :D :D :D
       These saws use 1.25
       *****************************************************