DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Husqvarna
*****************************************************
#Post#: 90558--------------------------------------------------
Husqvarna 135 X Torque 2019 - starting Problem
By: Bonsaichris Date: April 3, 2024, 4:10 pm
---------------------------------------------------------
Hoping someone can assist. Machine has fresh fuel + filter and
hoses. Carb has been changed and all checked over, new plug etc.
Choke set, purge operated etc. engine fires on first pull but
stops immediately. Further atttempts does not fire at all.
There is a spark which appears to me to be a bit weak. My
experiance is on 4 strokes so I could be misjudging this. Is it
possible the ignition pack is faulty, is it possible to test it.
Any help much appreciated.
Cheers Bonsai Chris
#Post#: 90559--------------------------------------------------
Re: Husqvarna 135 X Torque 2019 - starting Problem
By: Chainsawrepair Date: April 4, 2024, 5:32 am
---------------------------------------------------------
Aftermarket carb? Sometimes you get bad ones. Strato carbs on
these known issues.
Plug getting wet still after so called start off.
Coil could be issue too. So unless you have known good one to
test. Does it still have spark even after the first try.
Worst case. Be pulling muffler for a look at front of piston and
back of cylinder. Could still happen out of sight on sides. A
score with pinned ring.
Not really a saw you want to get a bunch a money in IMHO. Throw
away type saw if you cant do it yourself to fix.
*****************************************************