DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Chainsaws not listed - Gas OPE
*****************************************************
#Post#: 91520--------------------------------------------------
Re: Farmertec G3120 Holzfforma 3120
By: Chainsawrepair Date: July 24, 2025, 8:05 am
---------------------------------------------------------
What is the right female end for the coil connection?
Changing mine back forth and got in hurry pulled dang thing
apart.
My redneck quick fix with bigger end I had on hand.
#Post#: 91522--------------------------------------------------
Re: Farmertec G3120 Holzfforma 3120
By: Chainsawrepair Date: July 24, 2025, 8:44 am
---------------------------------------------------------
Never mind on question got answer in my CRG already. 8)
= 3/16 (.187) female spade connector. I have to order the non
insulated ones but I think the auto parts stores have the
insulated ones. They're used on a lot of speakers.
#Post#: 91556--------------------------------------------------
Re: Farmertec G3120 Holzfforma 3120
By: Chainsawrepair Date: August 5, 2025, 6:17 am
---------------------------------------------------------
Guy from Romania in my group. He went unlimited coil and ported
it says.
HTML https://youtu.be/tzWzh_rItNE
#Post#: 91580--------------------------------------------------
Re: Farmertec G3120 Holzfforma 3120
By: Chainsawrepair Date: August 20, 2025, 6:39 am
---------------------------------------------------------
Checking out the neojunk clone H side carb for 3120. Never put
it on saw and pump diaphragm feels like one I would replace when
stiff.
Reason why a bunch of us swore off on this clone maker. They are
way behind. Farmertec non H carb works great. These neojunk ones
are hit and miss.
#Post#: 91584--------------------------------------------------
Re: Farmertec G3120 Holzfforma 3120
By: Chainsawrepair Date: August 20, 2025, 9:55 am
---------------------------------------------------------
No wonder folks have issues with neojunk clone carbs. Brand new
carb and the diaphragm is stiff from get go.
Never had mix across it or installed yet.
It’s not even close to being pliable for pumping like Tillotson
kit.
Inside round metal piece was bent alittle too.
#Post#: 91586--------------------------------------------------
Re: Farmertec G3120 Holzfforma 3120
By: Chainsawrepair Date: August 21, 2025, 6:48 am
---------------------------------------------------------
Several folks having same issue with neojunk = neotec carb 3120
8120.
Few of us swore that clone company off. Their just to far
behind compared to Farmertec today.
neojunk 3120 8120 carb kit in their H carbs are horrible. I
swear the pump dia in this is double the thickness and and stiff
like a kit been run on emix
Just smh again this morning checking out the kit the new carb
came with.
#Post#: 91658--------------------------------------------------
Re: Farmertec G3120 Holzfforma 3120
By: Chainsawrepair Date: September 23, 2025, 12:13 pm
---------------------------------------------------------
Thanks to Ethan for leading the horse to water.
The aftermarket WG to buy.
Not those other ones that use HT inside.
Then if needing H just have one of the trusted guys do it in
these WG ones or oem one.
Not worth buying the aftermarket H side WG fakes with HT one by
neojunk.
#Post#: 91662--------------------------------------------------
Re: Farmertec G3120 Holzfforma 3120
By: Chainsawrepair Date: September 30, 2025, 9:05 am
---------------------------------------------------------
Here is a stock clone 3120 on Joe's dyno with a muffler then on
his pipe.
Notice where the power in cut would be.
#Post#: 91663--------------------------------------------------
Re: Farmertec G3120 Holzfforma 3120
By: Chainsawrepair Date: October 1, 2025, 8:11 am
---------------------------------------------------------
Stock OEM and clone 3120's done by Joe on his dyno.
OEM husqvarna 3120 dyno and his clone 3120
#Post#: 91664--------------------------------------------------
Re: Farmertec G3120 Holzfforma 3120
By: Chainsawrepair Date: October 1, 2025, 8:14 am
---------------------------------------------------------
Joe's pipe he made for that stock run above. Check out the
gains just a pipe did on stock saw. :o
He sells these pipes in several kit versions. Flat roll your own
cones or rolled and just a weld cones.
*****************************************************
DIR Previous Page
DIR Next Page