DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Chain - Bars - Grinders - Filing
*****************************************************
#Post#: 89941--------------------------------------------------
Oregon NOS old bars
By: Cut4fun Date: March 29, 2023, 6:51 am
---------------------------------------------------------
Anyone have info on these old NIB bars? 4 of them NIB.
Trying to help a guy that found them on my CR group FB.
I'd never seen such before or what mount etc they are.
#Post#: 89942--------------------------------------------------
Re: Oregin NOS old bars
By: ray benson Date: March 29, 2023, 8:40 am
---------------------------------------------------------
I don't have an old catalog to track down the number. Only
have 1969 and 1982 catalogs. Believe it is an early 1970's bar.
Found this on ebay
"This is a 15" Oregon 3/8 Chain Saw Guide bar .
It is HARD stamped with Oregon Part Numbers 23469- 3/8 23471-404
1558 1888SC.
It is a brand new bar .
Somebody has wrote on it "158RND H010 3/8-.058""
#Post#: 89943--------------------------------------------------
Re: Oregin NOS old bars
By: Chainsawrepair Date: March 29, 2023, 8:52 am
---------------------------------------------------------
[quote author=ray benson link=topic=7952.msg89942#msg89942
date=1680097226]
I don't have an old catalog to track down the number. Only
have 1969 and 1982 catalogs. Believe it is an early 1970's bar.
Found this on ebay
"This is a 15" Oregon 3/8 Chain Saw Guide bar .
It is HARD stamped with Oregon Part Numbers 23469- 3/8 23471-404
1558 1888SC.
It is a brand new bar .
Somebody has wrote on it "158RND H010 3/8-.058""
[/quote]
Thanks for researching. 8)
Bars isnt something I can figure out most times on the older
stuff.
#Post#: 89944--------------------------------------------------
Re: Oregin NOS old bars
By: ray benson Date: March 29, 2023, 9:16 am
---------------------------------------------------------
Would be nice to find a mid 1970's oregon bar application
guide.
#Post#: 90400--------------------------------------------------
Re: Oregon NOS old bars
By: old 040 Date: December 30, 2023, 8:05 am
---------------------------------------------------------
I know this old, but I found that bar number listed in my 1979
Oregon application guide. It's shows that bar fitting the
Partner R16 through R35 and being a 15" bar, .058 gauge, and 3/8
pitch.
*****************************************************