DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Husqvarna
*****************************************************
#Post#: 89510--------------------------------------------------
Husky 435 Pull Cord Issue
DIR By: dave1127
Date: September 28, 2022, 2:42 pm
---------------------------------------------------------
hello,
I have a husky435 and was running my chainsaw today with no
issues for a while. Then after I tried to restart it my pull
cord wouldn't retract. I pulled the cord off and as I took the
last screw out the cord retracted. I cleaned everything and
greased but the cord still wouldn't retract or would retract
super slow. I pulled the spark plug and noticed the cord would
retract without any issues. wondering where to start with
diagnosing issue? Seems like there might be an issue with
cylinder exhaust port possibly?? Not sure where to start.
Anyone have this issue before?
thanks
#Post#: 89512--------------------------------------------------
Re: Husky 435 Pull Cord Issue
DIR By: pleasant
Date: September 29, 2022, 6:10 am
---------------------------------------------------------
Would suggest internal recoil issue. Remove the unit as a whole
and inspect operation- if all the plastic components are intact
and undamaged, then your recoil spring could have snapped. Will
have enough tension in the spring left to retract the rope once
not under any load, but as soon as pressure applied- such as
fitted to the machine it won't have the tension required to
retract the rope.
*****************************************************
Page 1 of 1