DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Efco Olympyk Oleo-Mac
*****************************************************
#Post#: 423--------------------------------------------------
156 Failure
By: Old Iron Logging Date: March 3, 2011, 12:37 pm
---------------------------------------------------------
The first 156 came back. Owner thought av mounts were bad. A
little more serious however.
#Post#: 425--------------------------------------------------
Re: 156 Failure
By: Chainsawrepair Date: March 3, 2011, 1:00 pm
---------------------------------------------------------
Did he happen to say what he was doing when it happened? :o
#Post#: 435--------------------------------------------------
Re: 156 Failure
By: Old Iron Logging Date: March 3, 2011, 1:41 pm
---------------------------------------------------------
Said he was limbing, but I have my doubts. He fell a tree on a
152, and backed the forwarder over a 165. Not exactly a careful
lad. But he covered there repairs out of pocket.
#Post#: 469--------------------------------------------------
Re: 156 Failure
By: hamish Date: March 3, 2011, 7:57 pm
---------------------------------------------------------
Hard to tell mainly due to operator past experiences, nothing
like guys jamming there saw and pulling/yanking and destroying
the av mounts......
Did the fuel tank show any signs of wear?
#Post#: 472--------------------------------------------------
Re: 156 Failure
By: Old Iron Logging Date: March 3, 2011, 8:01 pm
---------------------------------------------------------
No other damage or marks. I see some weaknesses with parts on
Efco saws.
#Post#: 558--------------------------------------------------
Re: 156 Failure
By: Old Iron Logging Date: March 5, 2011, 3:46 pm
---------------------------------------------------------
Do you see any abuse?
#Post#: 559--------------------------------------------------
Re: 156 Failure
By: Cut4fun Date: March 5, 2011, 4:11 pm
---------------------------------------------------------
Is the handle bent or is that the way they come from factory?
#Post#: 560--------------------------------------------------
Re: 156 Failure
By: Old Iron Logging Date: March 5, 2011, 4:18 pm
---------------------------------------------------------
Thats factory angle.
#Post#: 591--------------------------------------------------
Re: 156 Failure
By: Old Iron Logging Date: March 6, 2011, 11:42 am
---------------------------------------------------------
Clutch side crank bearing is shot. Saw runs great as seal not
leaking yet. Vibration failure?
*****************************************************