DIR Return Create A Forum - Home
       ---------------------------------------------------------
       Chainsaw Repair
  HTML https://chainsawrepair.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Chainsaws not listed - Gas OPE
       *****************************************************
       #Post#: 87773--------------------------------------------------
       Castor Chainsaw first start after a very long time
       By: joe_indi Date: March 14, 2021, 12:10 am
       ---------------------------------------------------------
       I have posted on how I fixed the starter of this little Castor
       saw here
  HTML http://chainsawrepair.createaforum.com/ported-saws/recoil-spring-fix-for-deep-covers-and-thick-fingers/new/#new
       However, After such a long time the tubes were dust. So I
       replaced them. But the carb was not drawing fuel. But the saw
       would stay alive as long as I kept squirting fuel into the carb.
       I didnt want to risk damaging the carb so I made a Redneck
       cleaning tonic out of fuel, Polyurethane thinner, coconut oil
       and Carbon tetra chloride and used it as fuel to squirt.
       Unbelievably in 30 seconds the carb cleared itself and the saw
       is running by itself. Shut it off and tried it a couple of
       times. Starts up at first pull.
       I now find there is no oil being pumped out.
       Does anyone have a diagram for this saw that I could use.
  HTML https://drive.google.com/file/d/1ySde5y2xo-UJfL1l4--fSFGMdKTs_on_/view?usp=sharing<br
       />
       #Post#: 87784--------------------------------------------------
       Re: Castor Chainsaw first start after a very long time
       By: 3000 FPS Date: March 15, 2021, 7:02 pm
       ---------------------------------------------------------
       Nothing here but maybe you can make one.
       *****************************************************