URI:
   DIR Return Create A Forum - Home
       ---------------------------------------------------------
       Chainsaw Repair
  HTML https://chainsawrepair.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Husqvarna 
       *****************************************************
       #Post#: 86647--------------------------------------------------
       Please I need help 440e
   DIR By: Rogerjpalm
       Date: May 10, 2020, 9:57 am
       ---------------------------------------------------------
       Hello. I purchased a 440e from Lowe’s for around the house. It
       never ran right. It was hard to start when cold and would bog
       down. I figured it needed the carb adjusted so I bought the tool
       to do that. Honestly I never adjusted the carb because I didn’t
       use the saw and it was just sitting in the case. I pulled the
       saw out the other day after sitting about a year. I put fresh
       gas in it and it will try to start and that’s it. It fires a
       couple times and dies. I checked for spark and it looked weak so
       I bought a new plug. No difference. I tried adjusting the carb
       and it did the same thing. I checked the fuel filter and it was
       clean. I even checked the gap on the coil. After all of this, no
       difference. I was stump so I though maybe there was trash in the
       carb. I cleaned the carb completely and that did nothing. I even
       went as far as just replacing the carb with a brand new oem zama
       carb and the saw still try’s to start but that’s it. What could
       I be missing. It has to be something I’m just over looking but
       I’m really getting discouraged with this thing. Any help or
       suggestions would be very much appreciated. Thanks
       #Post#: 86648--------------------------------------------------
       Re: Please I need help 440e
   DIR By: Chainsawrepair
       Date: May 10, 2020, 12:20 pm
       ---------------------------------------------------------
       I'm reading you bought the tool to adjust carb but never did it?
       Then bought a new carb and never adjusted that one either. Am I
       reading this right?
       #Post#: 86649--------------------------------------------------
       Re: Please I need help 440e
   DIR By: Rogerjpalm
       Date: May 10, 2020, 3:15 pm
       ---------------------------------------------------------
       No you read it wrong. I’ve tried adjusting the carb when I
       pulled it out this year. Not sure what else to do.
       *****************************************************
       Page 1 of 1