DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Chainsaws not listed - Gas OPE
*****************************************************
#Post#: 86495--------------------------------------------------
Holzfforma G111 top handle Hutzl Farmertec
By: Chainsawrepair Date: April 15, 2020, 2:12 pm
---------------------------------------------------------
Farmertec Holzfforma G111 top handle
Well that didn’t take long. 8 days to USA. G111 with 12” set up
to add to the test stable.
Love seeing that full chisel picco 3/8lp chain like stihl 63PS
too.
12" bar groove needed opened up. Bar Oiler holes were
misdrilled. Still no biggie for me just a aggravating. All
fixed.
First thing after going through. Tossed the muffler screen just
like I did on my oem one way back. Sounds just like it.
Warranty says you need to run 25:1 to start out. Just so you
know.
But I go 40:1 and tuned it up a tad but still fat for a 200 111.
I'm still fat at 11K
Reminds me of my old 200t so far.
Time will tell. This one has generation 3 on it.
Starting 2nd tank and used almost a full tank of bar oil too to
tank of mix. Lunch time being I missed it.
It reminds me of my 200 I owned in the cuts. Time will tell.
Figured why not try it. Have read alot of problems with older
ones. But this is 3rd Gen. Seems bugs have worked out.
Also read about clutches, clutch springs, oiler sometimes and
the fuel lines and oil lines and av's. But IMO all easily
replaced.
I'm just a homeowner that uses a trim saw around the house. So
no commercial use from me. But have owned alot of top handles,
200T several 338's, 637 solo, echo's. But no new echos yet. Lots
of poulan top handles too.
HTML https://www.huztl.net/35-2cc-Holzfforma%C2%AE-G111-Top-Handle-Gasoline-Chain-Saw-Power-Head-Only-Without-Guide-Bar-and-Saw-Chain-All-Parts-Are-Compatible-With-MS200T-020T-Chainsaw-p715790.html?fbclid=IwAR248AaKLHpLpNELX9WC9k6tO3ecehOLOYsNjWY2ovQRgEn8EmGIOwC0zmQ
#Post#: 86496--------------------------------------------------
Re: Holzfforma G111 top handle
By: Chainsawrepair Date: April 15, 2020, 2:16 pm
---------------------------------------------------------
few more pics starting 2nd tank.
#Post#: 86499--------------------------------------------------
Re: Holzfforma G111 top handle
By: 3000 FPS Date: April 15, 2020, 4:45 pm
---------------------------------------------------------
Well like you said only time will tell how it does. Looks good.
#Post#: 86514--------------------------------------------------
Re: Holzfforma G111 top handle
By: Chainsawrepair Date: April 18, 2020, 12:22 pm
---------------------------------------------------------
I was ask on the CRG if they added the lanyard clip for
climbers. Gen 3 shown in pic has it.
#Post#: 86608--------------------------------------------------
Re: Holzfforma G111 top handle
By: Chainsawrepair Date: May 1, 2020, 2:18 pm
---------------------------------------------------------
Just finished using this Gen 3 G111 again. Trimming up some
maple limbs crowding one of my pear trees. 6"-7" limbs. Used the
battery pole saw I bought wife in past and the G111 together.
G111 is getting stronger. 😲😎
#Post#: 87748--------------------------------------------------
Re: Holzfforma G111 top handle Hutzl Farmertec
By: Cut4fun Date: March 5, 2021, 10:04 am
---------------------------------------------------------
Local was blown away testing the G111 200T clone.
#Post#: 89056--------------------------------------------------
Re: Holzfforma G111 top handle Hutzl Farmertec
By: Chainsawrepair Date: March 9, 2022, 6:25 am
---------------------------------------------------------
HTML https://youtu.be/7hJ-_S3IPFs
#Post#: 89232--------------------------------------------------
Re: Holzfforma G111 top handle Hutzl Farmertec
By: Chainsawrepair Date: May 23, 2022, 11:33 am
---------------------------------------------------------
Little overkill trimming dead out of the pin oak.
But this G111T Farmertec runs just like my OEM 200T did.
Their known for weak av and oil pump in commercial world. But
homeowner use flawless to date. IMHO all they need is the whole
screen system pulled out and tossed.
#Post#: 90171--------------------------------------------------
Re: Holzfforma G111 top handle Hutzl Farmertec
By: Chainsawrepair Date: August 16, 2023, 7:36 am
---------------------------------------------------------
This is from commercial use at 2 tree company's. Friend that
owns one of the company's gave me feedback.
Hey Kevin. They’re holding up surprisingly well. No real issues
yet and seem to have a bit more power than the MS201t we use as
well for pruning and small removals.
Gas caps, fuel vents, impulse line are typical Chinese low
quality but no failures yet.
Ported a couple for a friend who climbs for a local tree company
and he loves em, one had the crankcase seals fail after a few
months of daily use.
Me using mine after tornado #1 this year.
Owned since 2018 so just homeowner used. Not abused like tree
services.
#Post#: 90858--------------------------------------------------
Re: Holzfforma G111 top handle Hutzl Farmertec
By: Chainsawrepair Date: September 15, 2024, 10:13 am
---------------------------------------------------------
Info from CRG FB thread troubleshooting oiler.
Kirt you got me wondering after seeing your ported ones.
First run back when they first started making them years back.
This is stock dry setting in 90 degree shop.
Lower then I expected.
Even Farmertec plug looked good on left.
Checking stock PSI etc. Thick paper base gasket still in.
Kirt said most of the ones today he is seeing 135-150 before
doing the work on them.
2nd time in this morning was the charm.
I went through it with a lice comb this time.
😋😂🤦‍♂️
I did notch the rubber piece just a hair more over.
Then cleaned pump better and prime and turn by hand to watch
move oil.
Better now. But going to grab a extra pump for future.
Still one of the easiest dang saws to start. 2 pulls choke pop,
3rd running on fast idle.
*****************************************************
DIR Next Page