DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Stihl
*****************************************************
#Post#: 86099--------------------------------------------------
044 impulse and intake boot
By: ENTS Date: January 21, 2020, 6:46 pm
---------------------------------------------------------
How in the world do you get those two back on their respective
saw locations. The intake boot is fairly easy but that impulse
line and nipple are really hard to get at. Any tricks here?
And while we're on it .... No special tools here. Having to
jury rig fittings and such (pressure/vac tests). I've seen the
screw method of pulling seals. Not much meat to work with on
those seals. Any other way (except seal puller(remember, no
special tools in house))?
Again, no special tools .... How to get the fly wheel off?
TIA and hope all is well.
#Post#: 86100--------------------------------------------------
Re: 044 impulse and intake boot
By: president Date: January 21, 2020, 7:38 pm
---------------------------------------------------------
for the impulse line,remove the anti vibration mount screw and
push down on the rear handle which then opens up the space
for the line into case.After that,pull nipple into the carb box
using
a drop or 2 of oil on the tip to facillitate the pull
#Post#: 86102--------------------------------------------------
Re: 044 impulse and intake boot
By: ENTS Date: January 22, 2020, 6:40 am
---------------------------------------------------------
Pres,
I was never able to get that impulse out of the carb box.
Wanted to since it looked easier to put back together. All the
AVs are loose so I'm able to jokey everything around but still
can't get the impulse all the way on the brass nipple. I'm
afraid once saw is running that it will work it's way off.
My problem at this moment is seals. Clutch side leaking big
time. I'm assuming the fly wheel side is the same. Task for
today is order seals and pull that fly wheel.
Have a great day and hope all is well.
#Post#: 86105--------------------------------------------------
Re: 044 impulse and intake boot
By: Chainsawrepair Date: January 22, 2020, 7:42 am
---------------------------------------------------------
When I first started doing redneck repairs I used a drywall
screw. But years back I made this for the tiny fly side 026 and
been using it on everything since. = much easier
Oh I just did 2 066 impulse lines. I dont use oem molded lines.
I use the same echo oem 3mmx6mm black lines for impulse lines.
Only thing you hook it up on carb and not just slide into base.
Just the way I started doing them.
Havent tried this on a 44 yet. GL
The 44 I did that got smashed I had pulled tank and done oem. So
no help with info.
stihl 044 IPL
HTML http://oregonvyhne.sk/domains/7l8j90ep7a/my_files/Vkresy/Stihl_044_IPL_.pdf
#Post#: 86106--------------------------------------------------
Re: 044 impulse and intake boot
By: ENTS Date: January 22, 2020, 8:24 am
---------------------------------------------------------
Thanks C4F I'll be uncovering the fly wheel side today.
We'll see what transpires.
#Post#: 86107--------------------------------------------------
Re: 044 impulse and intake boot
By: Chainsawrepair Date: January 22, 2020, 9:25 am
---------------------------------------------------------
[quote author=ENTS link=topic=7374.msg86106#msg86106
date=1579703061]
Thanks C4F I'll be uncovering the fly wheel side today.
We'll see what transpires.
[/quote]
I have long straight and curved forceps to help with that and
yes on recoil off.
#Post#: 86123--------------------------------------------------
Re: 044 impulse and intake boot
By: ENTS Date: January 23, 2020, 7:52 pm
---------------------------------------------------------
Pulled the clutch side seal today. Easy. Now to that fly wheel
side. Gonna make one of those screw driver thingys and hope for
the best. That is a small area to work in.
*****************************************************