URI:
   DIR Return Create A Forum - Home
       ---------------------------------------------------------
       Chainsaw Repair
  HTML https://chainsawrepair.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Echo
       *****************************************************
       #Post#: 85553--------------------------------------------------
       john deere 65sv
       By: banditman Date: September 12, 2019, 2:01 pm
       ---------------------------------------------------------
       who actually makes the john deere 65sv chainsaw?  I need parts
       and cant seem to find any under the john deere name.
       #Post#: 85556--------------------------------------------------
       Re: john deere 65sv
       By: ray benson Date: September 13, 2019, 7:13 am
       ---------------------------------------------------------
       Echo document says CS-660EVL crosses to John Deere 65sv
       #Post#: 86112--------------------------------------------------
       Re: john deere 65sv
       By: banditman Date: January 22, 2020, 7:57 pm
       ---------------------------------------------------------
       Anybody know the spark plug gap plus the gap between the fly
       wheel and the ignition module?
       #Post#: 86113--------------------------------------------------
       Re: john deere 65sv
       By: 3000 FPS Date: January 22, 2020, 9:43 pm
       ---------------------------------------------------------
       No matter what saw I work on.   The spark plug is .025"
       The flywheel is
       a business card.
       Always worked.
       #Post#: 86116--------------------------------------------------
       Re: john deere 65sv
       By: Chainsawrepair Date: January 23, 2020, 7:14 am
       ---------------------------------------------------------
       Your right with the manual Roger =  Spark Plug Gap: 6 mm-8
       mm/0.24-0.26 in.
       I just use uncoated business cards too for coil gap.
       Just saving rest of info
       Length: 413 mm/16.3 in.
       Width: 257 mm/10.1 in.
       Height: 267 mm/10.5 in.
       Dry weight without bar and chain: 6.4 kg/14.1 lb.
       Engine Type: Air cooled, two-stroke, single cylinder gasoline
       engine
       Engine Displacement: 64.2 cc/3.86 cu. in.
       Fuel: Mixed (Gasoline and Two-Stroke Oil)
       Fuel/Oil Ratio: 32:1 OR 50:1 ECHO Power BlendŽ Gold or ECHO Red
       ArmorŽ ISO-L-EGD and JASO M345/FD, certified 2-stroke oil
       Fuel Tank Capacity: 0.65 l/21.9 US fl. oz.
       Oil Tank Capacity: 0.30 l/10.1 US fl. oz.
       Oiling System: Automatic
       Vibration Reduction: Anti-vibration device
       Handle: Rear
       Sprocket Type: Spur type, 7-tooth, 3/8 in. pitch
       Chain Tensioner: Side-access
       Technical Information:
       Manufacture Date: 1983-1987
       Bore: 47.0 mm/1.850 in.
       Stroke: 37.0 mm/1.457 in.
       Carburetor: Walbro diaphragm type HDB
       Spark Plug: NGK BPM-7A OR 7Y
       Spark Plug Gap: 6 mm-8 mm/0.24-0.26 in.
       Ignition System: Flywheel magneto, TCI system
       Starter System: Recoil starter
       Clutch: Automatic centrifugal clutch
       Idle Speed: 2,200-2,800 RPM
       Operating Speed: 5,500-9,000 RPM
       Wide Open Throttle Speed (W.O.T.): 11,000-12,000 RPM
       *****************************************************