DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Jonsered
*****************************************************
#Post#: 84743--------------------------------------------------
Jonsered 2163
By: Chainsawrepair Date: March 25, 2019, 1:56 pm
---------------------------------------------------------
Anyone collect or use the jonsered saws? Just picked up a jred
2163 62cc small mount with front tensioner. Can put the 365 372
375 OE topends on it.
Plus a jred 490 49cc. Both run. But want to check them out.
I missed on the jred 2171. But have the paperwork for the 2163
and 2171 bought new $600 2002 2163 and $650 2005 2171. Both show
show sold with 20" bars. I put the bar cover on the wall
already. Like the bag too.
490 makes for a badazz 3ci race saw when built and ported.
490 pending already
#Post#: 84751--------------------------------------------------
Re: Jonsered 2163 490
By: Chainsawrepair Date: March 26, 2019, 5:37 am
---------------------------------------------------------
jonsered 2163 checked out yesterday. Piston had strong witness
marks still = like new.
Starts runs like it should so far without testing in wood yet.
Saw is SF as of yesterday too on CRG. Member here and there put
down payment on it to hold.
#Post#: 84762--------------------------------------------------
Re: Jonsered 2163 490
By: Chainsawrepair Date: March 27, 2019, 12:02 pm
---------------------------------------------------------
When you find that bar you dont remember buying = priceless.
Was looking for a small mount K095 bar in 16-20 to test on the
jred 2163.
Jeremy Cole tested the chain you do on the franzen. Top notch
and good cutting stuff. Thanks you so much for offering to do
those 10 chains for me. Was cutting around 16" dry ash.
Good thing David you put a down payment on this badboy. Was
having 2nd thoughts on letting her go.
Runs the way 59cc-62cc saw should IMHO.
Better then I remember my fresh built 362xp did. She is a high
strung cutting machine.
#Post#: 84765--------------------------------------------------
Re: Jonsered 2163 490
By: Chainsawrepair Date: March 27, 2019, 6:32 pm
---------------------------------------------------------
Got a little 60cc testing if all works out soon.
I had already ran the dolmar makita 6100 stock. Now it has been
woods ported. Plus the owner has a stock jonsered 2260 to
compare.
#Post#: 89008--------------------------------------------------
Re: Jonsered 2163
By: Chainsawrepair Date: February 18, 2022, 8:26 am
---------------------------------------------------------
He is helping a guy with a 2163 ti upgrade the topend.
Spike60 info = The Jonsered 2163/2165/2171 share their internal
parts with the Husky 362/365/371. Everything you need can be
orderd through any Husky supplier.
The 50mm 2171/271 top end is 503 939 372 with 2 ring piston or
503 626 473 with the single ring piston. No advantage either
way, more a question of what's available at a given time.
The 48mm top end is 503 939 007.
Those kits are a direct bolt on, no other parts are needed.
*****************************************************