DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Echo
*****************************************************
#Post#: 91096--------------------------------------------------
Re: Echo 501
By: Cut4fun Date: January 20, 2025, 12:29 pm
---------------------------------------------------------
My FB chainsaw repair group. No time to think there just pulled
the trigger on another echo 501 🤦‍♂️
Being shipped from TX. Poor saw going to freeze up here. :D
#Post#: 91100--------------------------------------------------
Re: Echo 501
By: Chainsawrepair Date: January 23, 2025, 12:55 pm
---------------------------------------------------------
New used echo 501 showed up from tx.
No brainer time. 5mins for this. How they come stock. Take that
BS and pull it out easy to do and toss in a bin.
Do not turn it around and stick out like a we little pipe
:laughing: . Defeats the whole purpose of removing it.
Now look at that free muffler mod under there. :cheers:
Then open the front of that deflector up and your good to go for
free no cost.
#Post#: 91101--------------------------------------------------
Re: Echo 501
By: Chainsawrepair Date: January 23, 2025, 12:56 pm
---------------------------------------------------------
Modded echo 501 dyno sheet done by Gary. Stock and ported a
couple of them.
#Post#: 91103--------------------------------------------------
Re: Echo 501
By: Chainsawrepair Date: January 24, 2025, 4:47 am
---------------------------------------------------------
Dang what a goodie bag that came with saw. :o 8)
#Post#: 91107--------------------------------------------------
Re: Echo 501
By: Chainsawrepair Date: January 25, 2025, 1:02 pm
---------------------------------------------------------
To me there is no reason to buy those cnc muffler deflectors for
echo 501 4910 490 500.
But that is me. Easy peasy.
Toss that inner piece with tiny pipe.
#Post#: 91117--------------------------------------------------
Re: Echo 501
By: Chainsawrepair Date: January 31, 2025, 12:04 pm
---------------------------------------------------------
Echo 501 #2 cleaned and ready to test.
In the rain it looks like. SMH
Less then 2 mins to use this Oregon K095 bar. Now to see if oils
good. Appears it is lined up just like K216
K095 oils great no adjustments needed for that
#Post#: 91119--------------------------------------------------
Re: Echo 501
By: Chainsawrepair Date: February 1, 2025, 5:17 am
---------------------------------------------------------
Muffler modded echo 501 4910 will see gains of 18% 20% 22% give
or take plus from it in cut times.
Add woods ported port work with that you can see another 20% 23%
25% gain in cut times.
Just going by some testing done by a guy testing stock, muffler
modded, ported.
#Post#: 91122--------------------------------------------------
Re: Echo 501
By: Chainsawrepair Date: February 3, 2025, 6:33 am
---------------------------------------------------------
Echo 501 4910, Husky 550, Stihl 261 all woods ported by Joe and
checked on dyno. Sheets below.
PHO but both tanks filled up and weighed by Joe. 550 13lbs
5.9oz, 261 12lbs 6.5oz, 501 4910 11lbs 14.7oz
Then figure in cost of each to begin with. IMO why alot of folks
going the echo route.
#Post#: 91154--------------------------------------------------
Re: Echo 501
By: Chainsawrepair Date: February 16, 2025, 5:17 am
---------------------------------------------------------
I see no difference really in fit with your sae ones. They work
perfectly. Just like mm ones
Plus their only like 4 cents compared to 7 cents when bought at
oring site .
Oring I had cut and super glued for use too. Brown one.
#Post#: 91169--------------------------------------------------
Re: Echo 501
By: Chainsawrepair Date: February 23, 2025, 2:31 pm
---------------------------------------------------------
M5×16 x4
Echo V203001490
Self-Tapping Bolt
*****************************************************
DIR Previous Page
DIR Next Page