DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: GTG and Competition dates - Lumberjack World Record...
*****************************************************
#Post#: 7200--------------------------------------------------
Central Ohio Spring GTG June 2
DIR By: Cut4fun
Date: February 2, 2012, 5:55 am
---------------------------------------------------------
Talked to Bill wkpoor last night on the phone and he gave the OK
to pass his GTG info out to those interested.
((( I've got the bug to hold another GTG only this time in
warmer weather. So I'm posting for a show of hands for anyone
interested in a late May date. Somewhere near Memorial day was
my thoughts. It will be pretty much like my others with 8x8 and
10x10 inch racing cants and a variety of rounds to cut on. 1 Day
event with gathering about 9AM, general cutting and bs, lunch
about noonish, and racing in the afternoon. ))) Amanda, OH
I have been to his last 3 GTG's and Bill puts on a good one.
Usually hotstart over wood and 1 cut smaller saws to 2c uts
depending on amount of wood.
I plan on going and told him I would run the racing portion for
him if he liked.
Just putting in the tentative date in heading and post for you
Bill. June 2
#Post#: 7201--------------------------------------------------
Re: Central Ohio Spring GTG
DIR By: 660magnum
Date: February 2, 2012, 6:46 am
---------------------------------------------------------
Sounds good
Amanda is South of Columbus between Circleville and Lancastor
#Post#: 7202--------------------------------------------------
Re: Central Ohio Spring GTG
DIR By: Al Smith
Date: February 2, 2012, 8:04 am
---------------------------------------------------------
It's pretty much the center of the state so it's not a bad drive
from northern KY ,Indiana,Pa etc .
Geeze Kevin and I went to south Indiana once in a beat up Ranger
with a bad tranny and enough saws to make us look like a
traveling flea market .
More towards spring woud certainly be better than mid winter
especially Ohio winter where the weather can change in half a
day .Nice sunny morning then azz deep in snow by 6 PM .Humbug .
#Post#: 7215--------------------------------------------------
Re: Central Ohio Spring GTG
DIR By: man of stihl
Date: February 2, 2012, 4:03 pm
---------------------------------------------------------
Sounds good. I may try to go.
#Post#: 7257--------------------------------------------------
Re: Central Ohio Spring GTG
DIR By: wkpoor
Date: February 3, 2012, 11:32 pm
---------------------------------------------------------
Hello guys, I decided to up the ante this year and see if a guy
at work can come roast a pig for the meal. No guarantees as its
just in the planning stages. Also as before I will have cants
milled both 8" and 10".
#Post#: 7269--------------------------------------------------
Re: Central Ohio Spring GTG
DIR By: man of stihl
Date: February 4, 2012, 9:54 am
---------------------------------------------------------
Any ideas on what classes we will be racing?
#Post#: 7270--------------------------------------------------
Re: Central Ohio Spring GTG
DIR By: Chainsawrepair
Date: February 4, 2012, 10:09 am
---------------------------------------------------------
In the past it was
0-40 or so and top handles had run in same class at his
0-60 and went to 0-65cc 2010 to let a BB361 in and might need to
to let 365's in now. Bill's call.
0-80 or 81
0-100
unlimited
I would have a bumble bee class for top handles only. Then
-0-40 or 42cc for rear handles. 3.1ci 4ci 5ci 6ci unlimited if
it were me. Like I said Bill's call.
Would be nice to have enough wood in 8x8 to do 2 cuts this year
in the smallest classes up to the 51cc. 2010 up to 51cc was all
1 cut and then 4ci and up was 2 cuts.
#Post#: 7282--------------------------------------------------
Re: Central Ohio Spring GTG
DIR By: Al Smith
Date: February 4, 2012, 8:29 pm
---------------------------------------------------------
I haven't been to all of them but as I recall only at TT's and
at Pa. did we ever run just a top handle class .First shot was
at TT's there were only a few of us then a lot of others came on
board as time progressed .They got faster too .
Ha it's about the only class I do any good at . ;D
#Post#: 7284--------------------------------------------------
Re: Central Ohio Spring GTG
DIR By: EHP
Date: February 4, 2012, 8:50 pm
---------------------------------------------------------
if its late enough in the year I would be up for a GTG , just
early in the spring I have zero time trying to get everything
ready for the start of the racing season and with STS series
being early again this year it evens makes it a bit tougher to
have everything ready
#Post#: 7292--------------------------------------------------
Re: Central Ohio Spring GTG
DIR By: Chainsawrepair
Date: February 5, 2012, 10:43 am
---------------------------------------------------------
Bill there is guys on CompetitionSaws and Racesaws that are
being updated from your post here. Few are talking of car
pooling.
*****************************************************
Page 1 of 19
DIR Next Page