DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Partner
*****************************************************
#Post#: 7190--------------------------------------------------
partner 55cc 65cc 70cc 85cc 100cc
DIR By: chainsman1
Date: February 1, 2012, 6:06 pm
---------------------------------------------------------
55,65,70,85 and 100cc old partners, they have all the same
stroke with different bores. are the cylinder juggs all
interchangeable??
i do know the s55 partner would take a 65 cc top end,but dont
know for the others
#Post#: 7191--------------------------------------------------
Re: partner 55cc 65cc 70cc 85cc 100cc
DIR By: Chainsawrepair
Date: February 1, 2012, 6:20 pm
---------------------------------------------------------
I found out in my searching on my 550 the 650 and 7000 fit. I
dont think the others do.
#Post#: 7193--------------------------------------------------
Re: partner 55cc 65cc 70cc 85cc 100cc
DIR By: chainsman1
Date: February 1, 2012, 6:45 pm
---------------------------------------------------------
ok,same stroke,but 85 and 100 would have different cases i
guess...
#Post#: 7721--------------------------------------------------
Re: partner 55cc 65cc 70cc 85cc 100cc
DIR By: timberdollars
Date: February 21, 2012, 10:09 am
---------------------------------------------------------
Partner small case PRO cases with oil adjuster hole in bottom
will take ANY cylinder from 55cc to 70cc. Semi pro cases either
black or yellow with bolt on oil housing on bottom take 55cc to
65cc. Pro cylinders have wider cylinder sleeves and will not fit
non pro cases. K65/K650/K700 cut off saws cylinders also will
fit Pro cases.
Pro cases: P55/P70/7000/7000+/cs550/Cs650/Cs7000 all have oil
hole on bottom.
85cc to 1000cc are for those saws only!!!!!!!!!!!!!!!!
A S50 F55 or S55 upgrade to 65cc is easy and very
rewarding!!!!!!!!!!! both open and closed port pull good, also
all older R series cases will except 65cc cylinders regardless
of year. (r16-R517 or more)
I keep seeing saws advertised as P65??? no such animal that I'm
aware of. Pioneer Partner 650 YES!! P65 are most likely S65 or
R series.
Duane
#Post#: 8048--------------------------------------------------
Re: partner 55cc 65cc 70cc 85cc 100cc
DIR By: chainsman1
Date: March 4, 2012, 8:47 pm
---------------------------------------------------------
Is it possible to fit a 70cc top end on a semi pro bottom by
boring the cases? I guess the bolt pattern would fit
#Post#: 8838--------------------------------------------------
Re: partner 55cc 65cc 70cc 85cc 100cc
DIR By: SawTroll
Date: April 27, 2012, 9:53 am
---------------------------------------------------------
55, 65 and 70cc have a 36mm stroke.
85 and 100cc have a 40mm stroke, despite what Acres site state.
Btw, the cc numbers are not accurate.
#Post#: 9215--------------------------------------------------
Re: partner 55cc 65cc 70cc 85cc 100cc
DIR By: chainsman1
Date: May 14, 2012, 11:29 am
---------------------------------------------------------
i was playing in my partner junkpile yesterday,and found a 55cc
partner with an aluminum spacer between the exhaust port and the
muffler. its about 1/4 inch thick. some saws have it,some
dont. i wonder what it was for...
*****************************************************
Page 1 of 1