DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Poulan
*****************************************************
#Post#: 86871--------------------------------------------------
Re: NOS poulan parts Used poulan parts
By: Chainsawrepair Date: June 27, 2020, 2:04 pm
---------------------------------------------------------
Had to laugh after setting up the recoil right and setting saw
back on shelf. Least now another whole recoil to use.
#Post#: 86873--------------------------------------------------
Re: NOS poulan parts Used poulan parts
By: 3000 FPS Date: June 27, 2020, 11:12 pm
---------------------------------------------------------
Looks like you are really cleaning house.
#Post#: 87009--------------------------------------------------
Re: NOS poulan parts Used poulan parts
By: Chainsawrepair Date: July 29, 2020, 10:36 am
---------------------------------------------------------
Pulling some parts for folks. 2077 2083 415 475 445 505 425 oil
pump oiler, crankshaft, cylinder, NOS piston and used clutch.
#Post#: 87099--------------------------------------------------
Re: NOS poulan parts Used poulan parts
By: Chainsawrepair Date: September 1, 2020, 9:50 am
---------------------------------------------------------
Pulling some NLA used AV's today for a guys build.
Hope there is some aftermarket ones in the works for the lower
rubber AV's. [emoji16]
#Post#: 87153--------------------------------------------------
Re: NOS poulan parts Used poulan parts
By: Chainsawrepair Date: September 14, 2020, 9:53 am
---------------------------------------------------------
Dealer in my CRG FB looking for some parts today. So pulled
these out to offer him.
Poulan 335 Predator NOS cylinder and piston
Poulan Pro 295 new piston and cylinder set.
#Post#: 87158--------------------------------------------------
Re: NOS poulan parts Used poulan parts
By: Chainsawrepair Date: September 15, 2020, 11:47 am
---------------------------------------------------------
Pulling some parts for a guys 475.
Handle insert
Cass for brake
Handle brace
Outer metal cover plate
#Post#: 87159--------------------------------------------------
Re: NOS poulan parts Used poulan parts
By: Chainsawrepair Date: September 15, 2020, 11:51 am
---------------------------------------------------------
My last poulan pulley for 3450 3750 380 330. He was also needing
the spring. Put together in a 3450 recoil to be ready to bolt
on for him.
SOLD
#Post#: 87166--------------------------------------------------
Re: NOS poulan parts Used poulan parts
By: Chainsawrepair Date: September 16, 2020, 1:17 pm
---------------------------------------------------------
Thread pieced together from CRG FB.
Trying to take stock in what I got as runners in the 49cc - 54cc
poulans with mag cased. The tagged 49cc is sold.
Any of the others can go except for the one dad bought new in
1993.
Also think I just found a parts saw with a good 330 380 3750
3450 pulley. So may have one more left.
Now trying to figure out what I want to build next.
I thought I had 5 of those black with blue decal 54cc ones.
Found the first one I ever bought of those hiding.
5 runners. The last 4 were bought for parts for the first one I
bought. But all just needed minimal work to be runner again too.
Yep another good pulley. This was a 380 60cc I sold carb and
topend off of. But had used a 330 recoil testing it out year
back.
Betting I just found a HDA137 carb. Forgot about this 380 I
never fixed. Will know for sure in a sec. could be a 164 but all
380 I have seen had 137.
Hot dang it is the better of the 2 big carbs. HDA-137
#Post#: 87167--------------------------------------------------
Re: NOS poulan parts Used poulan parts
By: Chainsawrepair Date: September 16, 2020, 1:19 pm
---------------------------------------------------------
2 more I couldnt add above.
Betting I just found a HDA137 carb. Forgot about this 380 I
never fixed. Will know for sure in a sec. could be a 164 but all
380 I have seen had 137.
Hot dang it is the better of the 2 big carbs. HDA-137
#Post#: 87170--------------------------------------------------
Re: NOS poulan parts Used poulan parts
By: Chainsawrepair Date: September 18, 2020, 7:00 am
---------------------------------------------------------
Pulled the poulan pulley from 330 recoil to put in 380 recoil
for CRG member. SOLD
Also pulled poulan 380 yellow tank SOLD
Walbro HDA-137 car from same 380 SOLD
Poulan 2800 muffler etc models requested.
Plus the have broken metal part pulley that is still usable for
330 380 3450 3750. I kept it for a back up. Better then nothing.
*****************************************************
DIR Previous Page
DIR Next Page