DIR Return Create A Forum - Home
       ---------------------------------------------------------
       Chainsaw Repair
  HTML https://chainsawrepair.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Echo
       *****************************************************
       #Post#: 83725--------------------------------------------------
       Piston for a CS-4400
       By: Fishnuts2 Date: November 25, 2018, 9:38 pm
       ---------------------------------------------------------
       I have a nice 4400 saw with a badly scored piston.  Looking for
       a replacement that doesn't cost $65 like OEM.  I see a CS450 is
       the same bore at 43mm, and am wondering if the wrist pin is the
       same diameter and height.  I can get a 450 piston for about $20.
       Any ideas or experience out there?
       Thanks!
       #Post#: 83726--------------------------------------------------
       Re: Piston for a CS-4400
       By: Chainsawrepair Date: November 26, 2018, 6:55 am
       ---------------------------------------------------------
       Look at the 450 piston. To different in these pics.
  HTML https://www.hlsproparts.com/Echo-CS-450-piston-assembly-p/h31451.htm
       4400
  HTML https://www.ebay.com/itm/PISTON-KIT-FITS-ECHO-CS-4400-43MM-KIT-REPLACE-ECHO-PART-10000038932-/382224983787
       #Post#: 83741--------------------------------------------------
       Re: Piston for a CS-4400
       By: Fishnuts2 Date: November 27, 2018, 5:15 pm
       ---------------------------------------------------------
       Thanks so much!  I had looked for months trying to find a
       piston, but had not put the part number in my searches.  I
       ordered one, and should be good to go as the bore was not torn
       up too badly.
       Great site for information here!
       *****************************************************