DIR Return Create A Forum - Home
       ---------------------------------------------------------
       Chainsaw Repair
  HTML https://chainsawrepair.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Chain - Bars - Grinders - Filing
       *****************************************************
       #Post#: 82020--------------------------------------------------
       Chain Angle Checker
       By: Philbert Date: March 30, 2018, 12:34 pm
       ---------------------------------------------------------
       Inspired by a post in another forum.  A lot of guys do not need
       these.  And some depth gauge tools have something similar built
       in.  But these are very simple, and could be helpful as a
       training aid for new sawyers.
       3/8" aluminum angle stock from a home center or hardware store
       ($6 for 4 feet): fits over 3/8, .325, and 3/8 low profile
       chains.  Cut into 4" sections with a miter / chop saw - ended up
       with 12, for about .50 cents each.
       [attachimg=1]
       [attachimg=2]
       [attachimg=3]
       Philbert
       #Post#: 82021--------------------------------------------------
       Re: Chain Angle Checker
       By: Philbert Date: March 30, 2018, 12:39 pm
       ---------------------------------------------------------
       A little simpler than these:
       [attachimg=1]
       Philbert
       #Post#: 82022--------------------------------------------------
       Re: Chain Angle Checker
       By: 3000 FPS Date: March 30, 2018, 5:06 pm
       ---------------------------------------------------------
       Yep those look like they will work.   Just a quick glance and
       you know.
       *****************************************************