DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Efco Olympyk Oleo-Mac
*****************************************************
#Post#: 81958--------------------------------------------------
Olympyk 962
By: bdhall79 Date: March 24, 2018, 8:40 pm
---------------------------------------------------------
Hi, Would anyone know where I might find a recoil side cover for
a 1997 Oly. 962. My saw has too much compression to reasonably
try to pull start it so the side cover ripped off. Took it to
the dealer and he said the compression problem couldn't be
fixed. It did usually started easy, just have to stand on the
saw with both feet and pull hard on the cord. If I can find a
side cover I might try to get a few more years out of it. It's
been a good saw. Just the usual maint. while I've had it. If I
can't find a side cover it might become a parts saw. Thanks
#Post#: 81959--------------------------------------------------
Re: Olympyk 962
By: deezlfan Date: March 25, 2018, 5:10 am
---------------------------------------------------------
I'm pretty sure that the 962 was equipped with a decompressor
that should make starting the saw easy. You shouldn't have to
stand on the saw to start it and it certainly shouldn't have so
much compression that you would break a recoil attempting to
start it. Sounds to me like your saw has some internal damage
that is causing your symptom. What exactly did the dealer say
was wrong with your saw that could not be fixed?
The starter assembly is still available from the manufacturer
through several sources. Part number is 50012069DR.
#Post#: 81960--------------------------------------------------
Re: Olympyk 962
By: bdhall79 Date: March 25, 2018, 6:33 am
---------------------------------------------------------
Hi Deezl, I haven't ever seen a decompressor on my 962. The
dealer that I took it to didn't see anything wrong with the saw.
Once you get it started it runs as good as it ever did, that's
why I don't want to part it out if I don't have to. Thanks for
the part number. I'll look for one. Take care
#Post#: 81964--------------------------------------------------
Re: Olympyk 962
By: deezlfan Date: March 25, 2018, 1:29 pm
---------------------------------------------------------
So your saw has a steel plug here instead of a decompressor
button? If so, you can remove the plug and install a decomp and
your saw will will be much easier to start. Decomp buttons are
available at just about any saw shop.
[attachimg=1]
#Post#: 81983--------------------------------------------------
Re: Olympyk 962
By: bdhall79 Date: March 26, 2018, 8:23 pm
---------------------------------------------------------
Deezl, I looked at that same location on my saw and there isn't
anything there. I think I bought it in 1997. No sign of a plug.
I'll try to send a picture now. Tried yesterday, didn't work
out. Didn't work today either. File was too large I guess. I
took the picture with my phone. Don't know how to make it
smaller. But no plug.
#Post#: 82122--------------------------------------------------
Re: Olympyk 962
By: deezlfan Date: April 8, 2018, 6:13 am
---------------------------------------------------------
Search for free photo resizer on the Google and you can get it
down to the proper size.
#Post#: 82129--------------------------------------------------
Re: Olympyk 962
By: Chainsawrepair Date: April 8, 2018, 11:38 am
---------------------------------------------------------
[quote author=deezlfan link=topic=6909.msg82122#msg82122
date=1523186018]
Search for free photo resizer on the Google and you can get it
down to the proper size.
[/quote]
Never knew that was out there. Thanks for info.
#Post#: 82131--------------------------------------------------
Re: Olympyk 962
By: bdhall79 Date: April 8, 2018, 12:42 pm
---------------------------------------------------------
Thanks Deezl, I'll go find out about the resizer. The new recoil
cover came yesterday. I ordered the part number you told me and
it was the correct part. Saw even seams to pull a little
easier. Been cold here in W. Mi. so will be using it right
away. Thanks
*****************************************************