DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Jonsered
*****************************************************
#Post#: 81198--------------------------------------------------
Jonesred 2166 turbo bar oiler
By: Fshoup2010 Date: February 3, 2018, 12:27 pm
---------------------------------------------------------
Hey people I have the CS2166 it is 3 years old just out of
warranty, was cutting wood the other day and the blade started
to smoke super bad. Shut the saw off took it to the barn and
tore it down so I could see where all the bar chain oil was
coming from. It has the 24” bar and chain, when I checked the
adjustment screw it was all the way out 5 1/2 turns adjusted it
back to the recommended turns out. But I still can’t get this
thing from poring the bar oil out it’s bad enough my blade
smokes when I cut wood with it. All seals appear to be good what
am I missing any input will be greatly appreciated. Jonesred is
no help now that it is out of warranty.
#Post#: 81199--------------------------------------------------
Re: Jonesred 2166 turbo bar oiler
By: Gatekeeper Date: February 3, 2018, 4:47 pm
---------------------------------------------------------
Where is the oil running out at?
#Post#: 81200--------------------------------------------------
Re: Jonesred 2166 turbo bar oiler
By: Fshoup2010 Date: February 3, 2018, 4:56 pm
---------------------------------------------------------
It is coming out of the oil tube by the chain but it is just
pouring out no matter how tight I make the adjustment screw
#Post#: 81204--------------------------------------------------
Re: Jonesred 2166 turbo bar oiler
By: Chainsawrepair Date: February 3, 2018, 8:31 pm
---------------------------------------------------------
Manual
The oil pump is adjustable. Adjustments are made by
turning the screw using a screwdriver or combination
spanner. The machine is supplied from the factory set to
1 turn open. Turning the screw clockwise will reduce the
oil flow and turning the screw anti-clockwise will
increase
the oil flow.
Recommended settings:
Bar 16"-18"
2 turns from the closed position.
Bar 20"-24":
3 turns from the closed position.
Bar 28" - :
4 turns from the closed position.
*****************************************************