DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Partner
*****************************************************
#Post#: 6747--------------------------------------------------
Partner 5000 Circular saw.
By: Old Iron Logging Date: January 16, 2012, 2:47 pm
---------------------------------------------------------
Building a circ saw out of a 5000 partner. Have the blade on
now.
[IMG]
HTML http://i1153.photobucket.com/albums/p513/OILWOODCUTTER/IMG_3446.jpg[/img]
#Post#: 6749--------------------------------------------------
Re: Partner 5000 Circular saw.
By: w8ye Date: January 16, 2012, 2:55 pm
---------------------------------------------------------
The blade is on backwards?
#Post#: 6751--------------------------------------------------
Re: Partner 5000 Circular saw.
By: Old Iron Logging Date: January 16, 2012, 3:03 pm
---------------------------------------------------------
Yes, if it was on an electric circ.
I would have to run the chainsaw backward if I turn it around.
This is the only way it will work on a chainsaw.
#Post#: 6752--------------------------------------------------
Re: Partner 5000 Circular saw.
By: w8ye Date: January 16, 2012, 4:00 pm
---------------------------------------------------------
After thinking about it, I see what you mean.
I guess you will have to pull with it?
#Post#: 6753--------------------------------------------------
Re: Partner 5000 Circular saw.
By: Old Iron Logging Date: January 16, 2012, 4:14 pm
---------------------------------------------------------
Going to be mounted solid on my chainsaw mill carriage making it
an edger. ;)
#Post#: 6754--------------------------------------------------
Re: Partner 5000 Circular saw.
By: w8ye Date: January 16, 2012, 4:15 pm
---------------------------------------------------------
It should work well
#Post#: 6755--------------------------------------------------
Re: Partner 5000 Circular saw.
By: Old Iron Logging Date: January 16, 2012, 4:22 pm
---------------------------------------------------------
Time to confess, I am just making a degree wheel to check the
#'s on the 5000.
#Post#: 6756--------------------------------------------------
Re: Partner 5000 Circular saw.
By: Chainsawrepair Date: January 16, 2012, 5:05 pm
---------------------------------------------------------
:D
I have seen a 500 or 5000 concrete saw in the past.
#Post#: 6763--------------------------------------------------
Re: Partner 5000 Circular saw.
By: woodplayer Date: January 16, 2012, 7:07 pm
---------------------------------------------------------
I think most saw blades aren't recommended to rotate more than
7000rpm.
Just wondering how fast you you might be planning on turning
that one? ;)
#Post#: 6785--------------------------------------------------
Re: Partner 5000 Circular saw.
By: Cut4fun Date: January 17, 2012, 2:06 pm
---------------------------------------------------------
Art will you do me a favor and see if the worm gear on the 242
246 254 is the same worm gear on the partner 5000+.
I found the oem husqvarna worm gear remover for $16 and shipping
for the 242 246 254 etc. So just wondering if it might work on
the 5000 worm gear too.
says fits
51
55
42
242
246
254
257
262
*****************************************************
DIR Next Page