DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Echo
*****************************************************
#Post#: 79651--------------------------------------------------
CS-330T limiter cap mod questions
By: Jaymo Date: November 4, 2017, 7:50 pm
---------------------------------------------------------
CS-330T.
Appears to be a Walbro WT 739 or WT 1015-1
There are two tabs on each of the limiter caps.
Which tabs do I remove?
Do I remove both tabs from each of the limiters?
Do I just remove the tab closest to the carb body? (needle end
of cap)
Do I remove the tab farthest from the carb body (screwdriver
slot end of cap)
Sorry to sound like an idiot.
Don't want to make a mistake.
Would rather ask questions before doing it, than have to ask how
to fix what I did.
#Post#: 79661--------------------------------------------------
Re: CS-330T limiter cap mod questions
By: mountainlake Date: November 5, 2017, 5:42 am
---------------------------------------------------------
Remove both tabs so they are round and reinstall. Those tabs
grind off on a bench grinder real easy but hang on to them good
so they don't go flying. Steve
#Post#: 79678--------------------------------------------------
Re: CS-330T limiter cap mod questions
By: Jaymo Date: November 5, 2017, 10:15 am
---------------------------------------------------------
Thanks for the reply.
Have done so, and will "go loud" with the saw in a little bit.
#Post#: 79696--------------------------------------------------
Re: CS-330T limiter cap mod questions
By: Jaymo Date: November 5, 2017, 9:45 pm
---------------------------------------------------------
Need to fine tune the carb some more, but it's responding well
to the muff mod.
*****************************************************