DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Chainsaws not listed - Gas OPE
*****************************************************
#Post#: 79587--------------------------------------------------
Remington PL-4 oiling issue
By: super44 Date: November 2, 2017, 5:48 pm
---------------------------------------------------------
Paid 10.00 for thing and it runs OK, problem is oiling.
Duckbill was a pile of black goo so I pealed it out and put in a
new duckbill but it still will not pump oil. Even with oil in
the tank the manual oiler will not pump oil to the bar. The line
is clear from the manual pump to the bar but before that I would
need to tear it down to check the lines. I'm not 100% sure the
duckbill is the correct one but it is very close. Any thoughts
on do I need to tear it down?
Thanks
#Post#: 79711--------------------------------------------------
Re: Remington PL-4 oiling issue
By: super44 Date: November 6, 2017, 1:04 pm
---------------------------------------------------------
Does the duckbill face the oil tank?
#Post#: 79712--------------------------------------------------
Re: Remington PL-4 oiling issue
By: Chainsawrepair Date: November 6, 2017, 2:33 pm
---------------------------------------------------------
Remington pl-4 ipl
HTML http://s30387.gridserver.com/partsDiagrams/Remington%20PL-4.pdf
no help from me. maybe see something in ipl
#Post#: 79745--------------------------------------------------
Re: Remington PL-4 oiling issue
By: super44 Date: November 8, 2017, 10:05 pm
---------------------------------------------------------
Thanks for the reply. I put the pieces in a box on a shelf for
now.
*****************************************************