DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Echo
*****************************************************
#Post#: 78093--------------------------------------------------
306 top handle
By: leec Date: July 12, 2017, 1:52 pm
---------------------------------------------------------
This is the one with the new piston. Starts easily revs up but
dies in the cut after 2-3 seconds. Then starts up just fine.
Can't seem to get the H & L right.
#Post#: 78105--------------------------------------------------
Re: 306 top handle
By: mountainlake Date: July 14, 2017, 5:03 am
---------------------------------------------------------
Check the metering valve height real close, If my saw I'd just
bend it up a bit so it opens the needle a little more and give
it a try. Steve
#Post#: 78171--------------------------------------------------
Re: 306 top handle
By: leec Date: July 19, 2017, 2:36 pm
---------------------------------------------------------
Thanks , I'll give it a try.
*****************************************************