URI:
   DIR Return Create A Forum - Home
       ---------------------------------------------------------
       Chainsaw Repair
  HTML https://chainsawrepair.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Cordless Battery OPE - Corded Electric
       *****************************************************
       #Post#: 77669--------------------------------------------------
       Redback 18", 120V Lithium, Cordless (Battery) Chainsaw
       By: Philbert Date: June 8, 2017, 8:15 pm
       ---------------------------------------------------------
       I recently received a Redback 120 volt, battery powered chainsaw
       to evaluate. This saw can be seen in this YouTube video:
  HTML https://www.youtube.com/watch?v=xeFUUUL0Bfo
       Redback shares the same parent company as Dirty Hand Tools,
       better known for their log splitters in these forums, and also
       has a line of 40V O*P*E.
       Manufacturer specs
       Power: Brushless motor
       Battery: 120V Li-ion - 2 amp hour (240 watt hrs) or 3 amp hour
       (360 watt hours)
       Bar: 18"
       Chain: 3/8" low profile, .050 gauge, 61 drive links,
       semi-chisel, low kickback
       Chain Speed: 12 m/s (39 feet/second)
       Weight: 16.3 pounds with bar, chain, oil, etc.
       MSRP: $299
       Warranty: 5 years
       Philbert
       #Post#: 77670--------------------------------------------------
       Re: Redback 18", 120V Lithium, Cordless (Battery) Chainsaw
       By: Philbert Date: June 8, 2017, 8:18 pm
       ---------------------------------------------------------
       Initial Impressions
       The saw is well finished, and appears to be well made.  It came
       packed in a box, along with a 2Ah battery, rapid charger, guide
       bar, and chain. The manuals that came with it are fairly brief,
       but clear to read.
       Like many other saws in this product category, the saw features
       a tool-less chain tensioner, although, this one is a bit
       different, with a 'shaft drive' design (see next post). I like
       the rubberized handles.  Sound level was about the same as a
       large, electric drill. No noticeable vibration.
       The saw has a lot of power: It cut through everything I asked it
       to, ranging from 2", mixed, dry hardwoods, up to 12" freshly cut
       ash, in a pile set aside for this evaluation. I tried to
       intentionally bog it down, but had to lean on it hard to get it
       to slow down even a little bit - even gas saws would do this.
       All the wood in the attached photos were cut with about 1/2 of
       the 2.0Ah battery (based on LED indicators)
       Philbert
       #Post#: 77671--------------------------------------------------
       Re: Redback 18", 120V Lithium, Cordless (Battery) Chainsaw
       By: Philbert Date: June 8, 2017, 8:21 pm
       ---------------------------------------------------------
       Some Details
       This saw weighs in at 16+ pounds; the 120V, 2Ah battery is 4
       pounds of that by itself. Not an issue when bucking, where the
       weight is your friend, but will have to see if it is noticeable
       when felling or limbing.
       The seal around the oil discharge hole protrudes a bit, and at
       first, makes it seem like the bar is not seating properly.  But
       once the cover is placed and tightened with the hand screw, the
       bar sungs securely in place, with no leakage of oil.
       I like the idea of a rapid charger; these typically incorporate
       some type of fan to avoid overheating. This charger can also be
       wall mounted, and the battery latches in place to park securely.
       Large indicator light on the charger is easy to see.
       The chain brake is described as being both electric and
       mechanical. I was a little concerned at first, because I could
       move the chain by hand (power off) with the chain brake engaged
       - what I call a 'static test'.  But engaging the brake at full
       speed ('dynamic test') brought the chain to an immediate stop.
       I like the metal bucking dogs, but had to tilt the nose of the
       saw down considerably for them to engage at first. Eventually, I
       learned to engage just the lowest spike, which would allow me to
       rock the bar into the cut, if desired.
       Cordless saws have progressed by leaps over the past few years;
       this 120V saw appears to set a bar above the 36/40V saws.  Can't
       wait to see where it goes!
       Philbert
       #Post#: 77676--------------------------------------------------
       Re: Redback 18", 120V Lithium, Cordless (Battery) Chainsaw
       By: Chainsawrepair Date: June 9, 2017, 8:23 am
       ---------------------------------------------------------
       Nice write up.
       Never even seen or heard of this brand before.
       #Post#: 77753--------------------------------------------------
       Re: Redback 18", 120V Lithium, Cordless (Battery) Chainsaw
       By: Philbert Date: June 15, 2017, 4:37 pm
       ---------------------------------------------------------
       Bigger Test
       Neighbor had a large, sliver maple limb fall into their yard.
       Gave me a good test to try the saw some more.
       Cut up to 18" diameter green wood - was able to bog the saw down
       a bit if I really leaned on it, but it kept cutting if I let the
       saw do the work.  Cut all of the wood in the photo, about a face
       cord (1/3 full cord) with one, 2 Amp-hour battery.  I only have
       one battery for this saw, so I had to do the last few cuts with
       my 40V saw. The 120V saw clearly has more power.
       Philbert
       #Post#: 77754--------------------------------------------------
       Re: Redback 18", 120V Lithium, Cordless (Battery) Chainsaw
       By: Philbert Date: June 15, 2017, 4:42 pm
       ---------------------------------------------------------
       Sharpening
       Sharpening should not be any different from any other saw, but
       my other battery saws (Oregon) have built-in PowerSharp chain,
       so I was not expecting this.  There is a bit of resistance from
       the motor to pulling the chain around the bar, even with the
       chain brake released (battery removed for safety).  Had to
       release tension quite a bit, then re-tighten after filing.
       Philbert
       *****************************************************