DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Partner
*****************************************************
#Post#: 6239--------------------------------------------------
Partner 5000 or 500 chain brake/ side cover
DIR By: Jeff
Date: January 3, 2012, 6:07 pm
---------------------------------------------------------
Well I got my Partner 5000 / 500 service manual my nephew bought
it for me from e-bay.
In the mean time I have accidently run over one of my 5000's I
destroyed the "D" handel ,chain brake cover and recoil cover. I
had enough spare parts to rebuild most of it but I will need a
chain brake cover.Does anyone have a chain brake cover they
would part with? Actuall I would take 2 if I could get them/ you
never know.
I have searched and joined 2 other sites but still no luck
finding parts.I have joined Chainsaw repair.I will begin looking
at old saw shops in my area in Central Maine to see if any are
lying about.If anyone knows a good place to look let me know and
I will check it out. This was pasted by me from the
Tractorbynet forum when it was pointed out to me that I had not
made this request here.Thanks Jeff
#Post#: 6242--------------------------------------------------
Re: Partner 5000 or 500 chain brake/ side cover
DIR By: Cut4fun
Date: January 3, 2012, 6:33 pm
---------------------------------------------------------
I know between me and a few others you should be able to get
what ever you need. I have NOS clutch and recoil covers etc.
Could you make a list of what all you need.
Like clutch cover plain or brake parts
Handle
Recoil shell
etc
etc
#Post#: 6265--------------------------------------------------
Re: Partner 5000 or 500 chain brake/ side cover
DIR By: Jeff
Date: January 4, 2012, 3:15 pm
---------------------------------------------------------
Well thanks hotsaw I will hold off for right now though. I have
a guy comming tomorrow with a 5000 w/a stuck crank bering. He
Says the jug and piston are good and its a complete except for
chain and bar saw and chain he $50.00,,,,,Is there anyway to
"unstick" an Crank bering ?
Tomorrow I will see a 500 with a broken "D" handel complete saw
$50.00
Friday I am going to see a 5000 unknown condition complete saw
$20.00
I am planing on buying all of them I would rather you guys are
able to keep what ever you have ammased in parts for now anyway.
"
#Post#: 6269--------------------------------------------------
Re: Partner 5000 or 500 chain brake/ side cover
DIR By: Chainsawrepair
Date: January 4, 2012, 3:47 pm
---------------------------------------------------------
Thats the best way is to buy parts saws for parts. Lot cheaper
in long run.
To free up a bad crank bearing. I would split case remove both
bearings. Put 2 new bearings in $10 total and 2 new seals and
reused crank gasket if you can keep from ripping it. Why chance
ruining the saw totally with a iffy $5 crank bearing.
#Post#: 6271--------------------------------------------------
Re: Partner 5000 or 500 chain brake/ side cover
DIR By: Jeff
Date: January 4, 2012, 4:30 pm
---------------------------------------------------------
Well there is a reason I asked that.
First off I did just a moment ago buy a Partner 500 fo $40.00
it has a broken control handel but I have spare pats.I may have
listed the saws that I was about to look at in the wrong order.
Now as for the crank bering:
I am prettty handy but not very confidant.I have changed jugs
and Pistons, clutchs and stuff but I have NEVER been inside a
split case,,, the fact is I have never opened a case. I was
reading in my new service manual about spliting the case.It
seems that to remove the flywheel you need some special tool.We
used to use flywheel pullers in High School but I do not even
have one of those .Also I am not sure if I need to compleatly
remove the crank from the saw if so is'nt there somthing on the
opposite side as well? a oil pump gear sounds about right ? But
I am not sure. Then it said the case must be heated up to accept
the new seals? Not to sound like a nooby but This kind of scares
me some. I have done a lot more thn some people but I am not on
par with you guys either. So that is why I was wondering if I
could free up the crank bering.I agree withassement though, that
I wanted to install new bering and seals as well she would be
almost as good as new then. I wonder if there is somebody on
this site close to me in Maine that would stand over me while I
do that?
#Post#: 6273--------------------------------------------------
Re: Partner 5000 or 500 chain brake/ side cover
DIR By: Jeff
Date: January 4, 2012, 5:03 pm
---------------------------------------------------------
Can I buy the fly wheel puller that is talked about in my
service manual still? and also the seal driver and oil pump
tool? Or are there other ways to skin this cat ? we used to pull
the flywheel by giving the loosend nut a sharp rap with a hammer
while prying up on the on the underside of the flywheel.As far
as setting the seals I would have most likely used a socket of
proper size? but the oil pump,.....Never seen one dont have a
clue.
#Post#: 6278--------------------------------------------------
Re: Partner 5000 or 500 chain brake/ side cover
DIR By: Chainsawrepair
Date: January 4, 2012, 6:03 pm
---------------------------------------------------------
Oil pump comes right out. The worm gear you will have to redneck
make a tool and use heat to pull gear off crank.
Flywheel I just do as you with nut on flat and hit, also have a
3 jaw generic puller that works too.
Seals I use socket.
Bearing heat case knock out and install with sockets or do the
vise method with sockets cold. Both work.
My nickles worth.
#Post#: 6280--------------------------------------------------
Re: Partner 5000 or 500 chain brake/ side cover
DIR By: Jeff
Date: January 4, 2012, 6:07 pm
---------------------------------------------------------
The bering advice,... I dont understand maybe it is the way you
worded it but what do you mean "know out"? As far as the oil
pump yea I ment the worm gear sorry about that.
#Post#: 6282--------------------------------------------------
Re: Partner 5000 or 500 chain brake/ side cover
DIR By: Chainsawrepair
Date: January 4, 2012, 6:15 pm
---------------------------------------------------------
Fixed = LOL nah just typing faster then my spelling. Knock out.
#Post#: 6286--------------------------------------------------
Re: Partner 5000 or 500 chain brake/ side cover
DIR By: Chainsawrepair
Date: January 4, 2012, 6:17 pm
---------------------------------------------------------
There is a OEM worm gear remover $50. Redneck it with heat and
homemade puller or cut off.
*****************************************************
Page 1 of 6
DIR Next Page