DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Stihl
*****************************************************
#Post#: 76740--------------------------------------------------
661 Oil Pump Max Output
By: jmester Date: March 30, 2017, 8:12 pm
---------------------------------------------------------
There is a pin on the oil pump that can driven in or removed so
the oil pump control bolt will go another 1/4 turn. Thought I
would post some pics of the said pin and location. I pulled my
pin so I could always put it back in if need be. The pin boss is
deep enough to drive it in flush with the pump. If you decide to
drive it in you can use a punch to drive with out taking the
pump off.
Sent from my iPad using Tapatalk
#Post#: 76775--------------------------------------------------
Re: 661 Oil Pump Max Output
By: blueberrymuzik Date: April 1, 2017, 9:35 pm
---------------------------------------------------------
What did you use to pull it?
#Post#: 76783--------------------------------------------------
Re: 661 Oil Pump Max Output
By: jmester Date: April 2, 2017, 6:54 pm
---------------------------------------------------------
I just used regular pliers. Vise grips would probably work too
just didn't have any close by.
#Post#: 76787--------------------------------------------------
Re: 661 Oil Pump Max Output
By: blueberrymuzik Date: April 2, 2017, 9:12 pm
---------------------------------------------------------
Thanks! I'm going to pull that pin out of mine tomorrow.
#Post#: 76796--------------------------------------------------
Re: 661 Oil Pump Max Output
By: jmester Date: April 3, 2017, 8:59 pm
---------------------------------------------------------
I think you will be pleased with the extra oil.
#Post#: 89885--------------------------------------------------
Re: 661 Oil Pump Max Output
By: Chainsawrepair Date: March 10, 2023, 8:25 am
---------------------------------------------------------
Shared with a guy on CR FB group. He cant get 661 to oil a 36"
good.
*****************************************************