DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Echo
*****************************************************
#Post#: 76530--------------------------------------------------
600p
By: echo user Date: March 15, 2017, 12:50 pm
---------------------------------------------------------
I just bought a cs 600p it runs good cutting but dies at idle
after a bit what are some things I should check ?
#Post#: 76536--------------------------------------------------
Re: 600p
By: Chainsawrepair Date: March 15, 2017, 3:50 pm
---------------------------------------------------------
Have you checked the I idle and adjust to idle or have you check
your L setting.
#Post#: 76652--------------------------------------------------
Re: 600p
By: echo user Date: March 24, 2017, 8:56 pm
---------------------------------------------------------
I checked out and the intake bellows is torn I need to replace
it ,
#Post#: 76653--------------------------------------------------
Re: 600p
By: 3000 FPS Date: March 24, 2017, 9:12 pm
---------------------------------------------------------
[quote author=echo user link=topic=6369.msg76652#msg76652
date=1490406986]
I checked out and the intake bellows is torn I need to replace
it ,
[/quote]
I hope you did not run it to much. That sure would score a
piston up in a hurry.
#Post#: 76654--------------------------------------------------
Re: 600p
By: echo user Date: March 24, 2017, 9:16 pm
---------------------------------------------------------
piston and cyl look good so I probably got lucky
#Post#: 76689--------------------------------------------------
Re: 600p
By: echo user Date: March 26, 2017, 9:25 pm
---------------------------------------------------------
it runs good but I cant adjust high side lean at all I put a kit
in the carb any ideas ?
#Post#: 76691--------------------------------------------------
Re: 600p
By: 3000 FPS Date: March 26, 2017, 10:20 pm
---------------------------------------------------------
[quote author=echo user link=topic=6369.msg76689#msg76689
date=1490581506]
it runs good but I cant adjust high side lean at all I put a kit
in the carb any ideas ?
[/quote]
Double check the impulse make sure it is ok. Also make sure
the diaphragms and the gaskets are ok, and in there correct, or
and that the correct ones are in the carb.
#Post#: 76693--------------------------------------------------
Re: 600p
By: echo user Date: March 26, 2017, 10:33 pm
---------------------------------------------------------
I cleaned it out in a sonic cleaner and I put in a walbro kit .
I had a guy tell me that the check valve in carb may be bad and
I would have to replace the carb
#Post#: 76694--------------------------------------------------
Re: 600p
By: 3000 FPS Date: March 26, 2017, 10:35 pm
---------------------------------------------------------
That is another possibility but I would check those things I
mentioned before replacing the carb.
#Post#: 76695--------------------------------------------------
Re: 600p
By: echo user Date: March 26, 2017, 10:38 pm
---------------------------------------------------------
I will check it out tomorrow thank you I will let you know
*****************************************************
DIR Next Page