DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: McCulloch
*****************************************************
#Post#: 75593--------------------------------------------------
Pro mac 46 ,clutch drum . Advice needed
DIR By: Jez33
Date: January 19, 2017, 2:05 pm
---------------------------------------------------------
Hallo,
I need some advice on getting a new clutch drum (sprocket) as on
my pro mac 46 the teeth have worn out. I asked a spares dealer
and the original drum will cost about £45 plus shipping which
makes me think I can be throwing good money after bad, but on
looking on ebay n amozon I see there's lots of different drums
for as little as £3.50 ..
So my question is, which modern day chainsaw has the same
clutch drum for my promac 46?
The sprocket has 7 teeth on my saw but I'm guessing the sizes
of the drums can be different too ?
#Post#: 75599--------------------------------------------------
Re: Pro mac 46 ,clutch drum . Advice needed
DIR By: heimannm
Date: January 19, 2017, 7:51 pm
---------------------------------------------------------
ProMac 46 is an Italian made saw, see if you can find an
Efco/Olympyk/Oleomac dealer and show them your drum.
Photos of the saw and the drum might help, depending on where
you are in the world there may be other options.
Mark
#Post#: 75603--------------------------------------------------
Re: Pro mac 46 ,clutch drum . Advice needed
DIR By: pete
Date: January 19, 2017, 11:26 pm
---------------------------------------------------------
try get the part number and compare that to some of the other
euro macs I have a few of the italian ones and the minimac
clutch drum was an exchange. will try have a look on the weekend
*****************************************************
Page 1 of 1