DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Dolmar Makita
*****************************************************
#Post#: 75331--------------------------------------------------
Sachs Dolmar Identification
By: Giles Date: January 5, 2017, 10:45 am
---------------------------------------------------------
I have a SD on bench that I am rebuilding. The ID plate was all
but destroyed by jumped chain and is unreadable.
It is a 44mm bore (Closed Port) with two piston rings.
How can I determine if it is a 111 or a 115?
#Post#: 75333--------------------------------------------------
Re: Sachs Dolmar Identification
By: HolmenTree Date: January 5, 2017, 11:55 am
---------------------------------------------------------
111 is 44mm bore. But your saw looks like a totally redesigned
111 from the old one I'm looking at.
#Post#: 75753--------------------------------------------------
Re: Sachs Dolmar Identification
By: 166 Date: January 27, 2017, 5:51 pm
---------------------------------------------------------
Should be a 115 if closed port and 2 ring piston.
*****************************************************