DIR Return Create A Forum - Home
       ---------------------------------------------------------
       Chainsaw Repair
  HTML https://chainsawrepair.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Echo
       *****************************************************
       #Post#: 75105--------------------------------------------------
       Echo CS 660EVL ignition module
       By: Ian Date: December 28, 2016, 7:26 am
       ---------------------------------------------------------
       I have a CS660EVL with 24" bar. It starts and runs OK but after
       say 20 minutes use it suddenly dies just as if I had hit the
       kill switch. If I remove the spark plug and spin the motor,
       there is no spark. When it cools down it will start and run
       again for a while, as though nothing had happened. I am assuming
       its an ignition module failure which is bad news as the module
       seems to be an obselete part. Any thoughts, and specifically,
       does anyone know if a different module can be made to fit. It's
       way too good a saw to throw away! Thanks.
       #Post#: 76135--------------------------------------------------
       Re: Echo CS 660EVL ignition module
       By: mowertech Date: February 21, 2017, 6:43 am
       ---------------------------------------------------------
       [quote author=Ian link=topic=6235.msg75105#msg75105
       date=1482931585]
       I have a CS660EVL with 24" bar. It starts and runs OK but after
       say 20 minutes use it suddenly dies just as if I had hit the
       kill switch. If I remove the spark plug and spin the motor,
       there is no spark. When it cools down it will start and run
       again for a while, as though nothing had happened. I am assuming
       its an ignition module failure which is bad news as the module
       seems to be an obselete part. Any thoughts, and specifically,
       does anyone know if a different module can be made to fit. It's
       way too good a saw to throw away! Thanks.
       [/quote]can u  post  a  imagge of  the coil  i  have  coils
       with  no  part  numbers
       #Post#: 86053--------------------------------------------------
       Re: Echo CS 660EVL ignition module
       By: Girbull Date: January 14, 2020, 8:07 pm
       ---------------------------------------------------------
       I have been trying to find an echo 660 ignition coil and saw
       this thread, any chance you still have any?
       *****************************************************