DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Trades Swap Section
*****************************************************
#Post#: 5800--------------------------------------------------
roller nose tips 2.5" $10
DIR By: Cut4fun
Date: December 23, 2011, 12:30 pm
---------------------------------------------------------
On ebay 2.5" roller tips. $10
HTML http://www.ebay.com/itm/2-5-CHAINSAW-BAR-TIP-NEW-STBX746-/350489151424?pt=LH_DefaultDomain_0&hash=item519ac807c0
#Post#: 5809--------------------------------------------------
Re: roller nose tips 2.5" $10
DIR By: 660magnum
Date: December 23, 2011, 2:08 pm
---------------------------------------------------------
I could envision someone making up some roller nose bars with
those
#Post#: 58286--------------------------------------------------
Re: roller nose tips 2.5" $10
DIR By: Philbert
Date: May 27, 2015, 6:48 pm
---------------------------------------------------------
Ordered one today.
Thanks!
Philbert
#Post#: 68388--------------------------------------------------
Re: roller nose tips 2.5" $10
DIR By: Skippysphins
Date: January 18, 2016, 6:57 pm
---------------------------------------------------------
Cut4fun could you recommend a good bar for racing with this
roller tip
#Post#: 68390--------------------------------------------------
Re: roller nose tips 2.5" $10
DIR By: Chainsawrepair
Date: January 18, 2016, 7:20 pm
---------------------------------------------------------
--- Quote from: Skippysphins link ---
>
> Cut4fun could you recommend a good bar for racing with this
roller tip
>
--- End Quote ---
Make your own or find a bar the tip uses.
They really are not needed like I found out later on. But they
do add a cool factor to the look.
#Post#: 68439--------------------------------------------------
Re: roller nose tips 2.5" $10
DIR By: Al Smith
Date: January 20, 2016, 3:21 am
---------------------------------------------------------
I think the roller nose was thought to be a big deal at one time
.Cannon will make you one but they are extremely proud of them
.Upwards of $300 or more ,depending
The big fat west coast belly bars are not suited for our east
coast three cut on cants because they are so fat .You have to
get about 8 inches of bar through the cut before you transition
to the next up or down cut .
I think the idea was on those big west coast cuts was in theory
you are pulling the chain in more of a circular motion which
also in theory pulls easier .Plus the fact the curvature in the
bar address the cutters differently to the wood than a straight
bar .
#Post#: 68445--------------------------------------------------
Re: roller nose tips 2.5" $10
DIR By: Chainsawrepair
Date: January 20, 2016, 1:18 pm
---------------------------------------------------------
The ones Cliff Helsel had made up from Cannon for the 3120
hotsaws were $200.
These tips posted here fit these bars too. ;)
HTML http://i59.photobucket.com/albums/g289/doemaster789/CH3120/Copyofhelsel3120015.jpg
HTML http://i59.photobucket.com/albums/g289/doemaster789/CH3120/Copyofhelsel3120017.jpg
*****************************************************
Page 1 of 1