DIR Return Create A Forum - Home
       ---------------------------------------------------------
       Chainsaw Repair
  HTML https://chainsawrepair.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Homelite
       *****************************************************
       #Post#: 73121--------------------------------------------------
       UT10734R won't idle
       By: JamesVassil Date: August 17, 2016, 3:21 pm
       ---------------------------------------------------------
       UT10734R (14")
       This saw was unused for several years. I filled it with a fresh
       mix of 32/1 (that was marked on the saw by a sharpie), cleaned
       and re-gapped the plug. I also put a new chain on it. It starts
       and runs and cuts fine but I have to keep the throttle up or it
       dies. I've adjusted the idle screw with no results. There are 2
       other adjustment screws and I have not touched them. Someone
       told me they were probably the lo and hi adjustments. I don't
       have a shop manual so I don't know the reference points to
       adjust them.
       Thanks in advance for any help on this and hagd.
       Jim
       #Post#: 73124--------------------------------------------------
       Re: UT10734R won't idle
       By: Chainsawrepair Date: August 17, 2016, 6:27 pm
       ---------------------------------------------------------
       UT-10734-R CS3314  IPL
  HTML https://www.partstree.com/parts/homelite/saws-chainsaw/cs3314-ut-10734-r-homelite-chainsaw/
       L closest to engine, H furthest away.
       Try opening your L up counterclockwise. If that dont help it may
       be your carb diaphragms have gotten stiff.
       *****************************************************