DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Dolmar Makita
*****************************************************
#Post#: 72899--------------------------------------------------
Maktia Dolmar 8100
By: Chainsawrepair Date: July 27, 2016, 5:04 pm
---------------------------------------------------------
After letting it go for almost 3 weeks now and still only
rumors.
Makita Dolmar 8100 80.7cc 52mm bore 38mm stroke is my bet. I
would also bet it will be influenced from the ek8100
Makita EK8100 p+c below
[img width=800
height=560]
HTML https://cdn1.bigcommerce.com/n-dvzvde/3kgh3kz/products/155993/images/63452/EK_Kit__37900.1438697034.1280.1280.jpg?c=2[/img]
#Post#: 72915--------------------------------------------------
Re: Maktia Dolmar 8100
By: Eccentric Date: July 28, 2016, 3:35 am
---------------------------------------------------------
Could be interesting. Doubt I'll replace my 181SE with one, but
I'm still looking forward to seeing this if it materializes.
Replacement for the 7910 I take it? My friend Dave's 6910 with
the 7910 top end is a strong runner.
#Post#: 72925--------------------------------------------------
Re: Maktia Dolmar 8100
By: NathanielVansickle Date: July 28, 2016, 3:26 pm
---------------------------------------------------------
only one small problem with basing a new saw off the 8100 cutoff
saw......it already exists and is called a 7910
#Post#: 72927--------------------------------------------------
Re: Maktia Dolmar 8100
By: Chainsawrepair Date: July 28, 2016, 5:55 pm
---------------------------------------------------------
[quote author=Nathaniel Vansickle
link=topic=6041.msg72925#msg72925 date=1469737603]
only one small problem with basing a new saw off the 8100 cutoff
saw......it already exists and is called a 7910
[/quote]
ek8100 is listed as 81cc ? so guessing it was 80.7cc so it has
a 38mm stroke instead of the 7910 37mm stroke ?
7910 was 79cc
feed the need to WAG ;)
#Post#: 72928--------------------------------------------------
Re: Maktia Dolmar 8100
By: Chainsawrepair Date: July 28, 2016, 6:11 pm
---------------------------------------------------------
Same crank shown in 8100 comes back to the dolmar 8216
Model:
PC-8216
Engine manufacturer
DOLMAR
Engine
2-stroke
Displacement
81 cc (5 cu. in)
Fun guessing anyways. :P
#Post#: 72929--------------------------------------------------
Re: Maktia Dolmar 8100
By: Chainsawrepair Date: July 28, 2016, 6:45 pm
---------------------------------------------------------
Found one called 8240 too. But all the time I have for goofing
off guessing.
#Post#: 72932--------------------------------------------------
Re: Maktia Dolmar 8100
By: Chainsawrepair Date: July 28, 2016, 7:30 pm
---------------------------------------------------------
Nate how about a big 6100 style ;) in 52mm 38mm 8100 ;D :P
#Post#: 72937--------------------------------------------------
Re: Maktia Dolmar 8100
By: NathanielVansickle Date: July 29, 2016, 9:23 am
---------------------------------------------------------
i havent heard much about the new 80+cc saw except that it will
be similar in design to the 6100 and be based on west coast
cutting conditions so i expect a functional and comfortable full
wrap handle and large dual bucking spikes. I have been lobbying
for 90+cc every chance i get but everytime they shoot me down on
that and say its not happening, expect low to mid 80cc.
#Post#: 72940--------------------------------------------------
Re: Maktia Dolmar 8100
By: Eccentric Date: July 29, 2016, 12:31 pm
---------------------------------------------------------
A west coast 5-5.5ci saw with a good full wrap is interesting
indeed. Now if we had some dealers out here to sell and service
them then that'd be great...
#Post#: 72942--------------------------------------------------
Re: Maktia Dolmar 8100
By: Gatekeeper Date: July 29, 2016, 4:11 pm
---------------------------------------------------------
Will we see it before husky releases the 572 or whatever is what
I wonder.
*****************************************************
DIR Next Page