DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Efco Olympyk Oleo-Mac
*****************************************************
#Post#: 72877--------------------------------------------------
efco 8200
By: Chainsawrepair Date: July 26, 2016, 5:59 pm
---------------------------------------------------------
Is the efco 8200 MT 8200 mt8200 a updated or same 980?
HTML http://www.efcopower.com/products/chainsaws/mt-8200
Seeing them new for $599. Are they NOS like the solo 665 for
sale still or are they still making them?
efco 8200 IPL
HTML http://www.efcopower.com/sites/default/files/MT8200_IPL.pdf
manual
HTML http://www.efcopower.com/sites/default/files/MT7200-8200_OM_B_rev1_0.pdf
Specifications:
Displacement
Power
Bar Length
Chain (pitch x gauge)
Oil Pump
Oil/Fuel Tank Capacity
Weight
Max RPM
HTML http://img0036.psstatic.com/130861799_efco-mt-8200-arborist-chainsaw-24-in-80cc-new-with-.jpg
#Post#: 72878--------------------------------------------------
Re: efco 8200
By: Old Iron Logging Date: July 26, 2016, 6:20 pm
---------------------------------------------------------
As far as I can remember it is the newest version of the 980.
Different ports, coil, carb and air intake. I have the MT7200
and 980. Every exterior piece will interchange. Stroke is
different between 70 and 80 cc saws. Good price on the saw. Of
all the Efco saws I have or had the 980 7200 are the toughest by
far.
#Post#: 72890--------------------------------------------------
Re: efco 8200
By: Chainsawrepair Date: July 27, 2016, 12:13 pm
---------------------------------------------------------
piston cylinder 50102012D says Fits Efco 181 981 MT-8200
52mm bore so must have same stroke of the solo 681 ?
IPL
HTML http://www.efcopower.com/sites/default/files/MT8200_IPL.pdf
[img width=800
height=600]
HTML https://cdn.shopify.com/s/files/1/0032/0472/products/mt8200_002_1024x1024.JPG?v=1418419263[/img]
#Post#: 72891--------------------------------------------------
Re: efco 8200
By: Gatekeeper Date: July 27, 2016, 12:24 pm
---------------------------------------------------------
Same bore and stroke of 181/281. Far as I know still produced
Sent from my SM-G930V using Tapatalk
#Post#: 72894--------------------------------------------------
Re: efco 8200
By: Chainsawrepair Date: July 27, 2016, 12:46 pm
---------------------------------------------------------
solo 38mm stroke 665-681
dolmar makita 37mm stroke 6400-7900
husky 36mm stroke 362-375
poulan 36mm stroke 415-505
husky 38mm stroke 181-288
So that should put the 8200 52mm bore and 38mm stroke. ;D
#Post#: 72900--------------------------------------------------
Re: efco 8200
By: Chainsawrepair Date: July 27, 2016, 5:10 pm
---------------------------------------------------------
Stock 8200 and first cuts.
Remember this guy from back in 2008-2011. Video 2010
HTML https://youtu.be/HWQsggs_0eY
#Post#: 72902--------------------------------------------------
Re: efco 8200
By: Chainsawrepair Date: July 27, 2016, 5:17 pm
---------------------------------------------------------
Looks like same wood above tested these too. Is what it is.
makita had a 8T on it and rest of saws had 7T
HTML https://www.youtube.com/watch?v=IbKogw8DPSM
HTML https://www.youtube.com/watch?v=v9UP6uUxuDY
HTML https://www.youtube.com/watch?v=Xc9oSqKEwRQ
HTML https://www.youtube.com/watch?v=6nfaaPjOiK4
#Post#: 72903--------------------------------------------------
Re: efco 8200
By: exSW Date: July 27, 2016, 5:43 pm
---------------------------------------------------------
Word I got on the 8200's they aren't making them anymore but
they have a warehouse full of them stateside.
#Post#: 72906--------------------------------------------------
Re: efco 8200
By: Chainsawrepair Date: July 27, 2016, 8:00 pm
---------------------------------------------------------
[quote author=exSW link=topic=6037.msg72903#msg72903
date=1469659408]
Word I got on the 8200's they aren't making them anymore but
they have a warehouse full of them stateside.
[/quote]
I was checking for local dealers, not much info on their online
sites. Mt Gilead and Marion.
I want to know about parts availability too.
Thats why I never touched the nos solo 665's that have been for
sale for $500.
#Post#: 72923--------------------------------------------------
Re: efco 8200
By: Chainsawrepair Date: July 28, 2016, 12:45 pm
---------------------------------------------------------
Looking for specs on the walbro wj121 carb.
All my links from past no longer working for walbro info.
[img width=600
height=800]
HTML https://cdn.shopify.com/s/files/1/0032/0472/products/mt7200_016_1024x1024.jpg?v=1379022019[/img]
[img width=800
height=600]
HTML https://cdn.shopify.com/s/files/1/0032/0472/products/efco7200_016_1024x1024.JPG?v=1398455276[/img]
*****************************************************
DIR Next Page