DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Tool Shed
*****************************************************
#Post#: 72586--------------------------------------------------
Air hammer
By: jmester Date: July 4, 2016, 6:24 pm
---------------------------------------------------------
Looking to buy an air hammer. Have been looking at the IR 118.
What do you guys use? Also what is better a short or long
barrel? Is the 118 any good?
HTML http://www.ingersollrandproducts.com/am-en/products/tools/cutting-and-hammering-tools/air-hammers/118MAX-Vibration-Reduced-Air-Hammer
#Post#: 72587--------------------------------------------------
Re: Air hammer
By: dannyupsolate Date: July 4, 2016, 6:58 pm
---------------------------------------------------------
Never got to use one that small these hang in there
HTML http://www.ingersollrandproducts.com/am-en/products/tools/construction-tools/chipping-hammers.
#Post#: 72589--------------------------------------------------
Re: Air hammer
By: Al Smith Date: July 4, 2016, 7:08 pm
---------------------------------------------------------
The little ones are slick as snot on a door knob .You can cut
bolts,drive out rivets ,use a panel cuter and do body work .Cut
the top out of a 50 gallon drum,clean morter off bricks .I think
I have three,auctions you know.
#Post#: 72596--------------------------------------------------
Re: Air hammer
By: heimannm Date: July 5, 2016, 12:57 pm
---------------------------------------------------------
IR is a good brand. I bought a cheap one, probably Harbor
Freight and while the air hammer/chisel works fine, the tool are
too soft to be really useful.
Check out the availability of tools for the 118 to make sure you
are not limited to OEM, or if OEM is the only option make sure
they have a good selection at reasonable prices.
Mark
#Post#: 72600--------------------------------------------------
Re: Air hammer
By: NathanielVansickle Date: July 5, 2016, 6:53 pm
---------------------------------------------------------
HTML http://www.ingersollrandproducts.com/am-en/products/tools/cutting-and-hammering-tools/air-hammers/116
i think this is the one i have in the shop. works good and have
been using it for 6-8 yrs now. swapped the spring retainer out
for one of the quick release chucks like this
HTML https://www.amazon.com/Drive-Quick-Change-Hammer-Retaining/dp/B007QV9516
*****************************************************