DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Chainsaws not listed - Gas OPE
*****************************************************
#Post#: 71054--------------------------------------------------
husqvarna 323c weedeater
By: dannyupsolate Date: April 11, 2016, 11:47 am
---------------------------------------------------------
Just dug into this one got flywheel off. Much better quality
than the cheapo's I been working on. It did say Sweden on
tag.Now to rob flywheel off another one. Key was cast into
flywheel and gone.
#Post#: 71056--------------------------------------------------
Re: husqvarna 323c weedeater
By: Chainsawrepair Date: April 11, 2016, 2:09 pm
---------------------------------------------------------
I have a 322L. Is the 323C a newer version of it?
HTML https://youtu.be/LVz2ww2UDfE
#Post#: 71061--------------------------------------------------
Re: husqvarna 323c weedeater
By: dannyupsolate Date: April 11, 2016, 3:25 pm
---------------------------------------------------------
may be older . I will try to rob flywheel from a 323L may take
it's straight shaft while I am at it. 323C had curved shaft. A
customers 323L and my parts 323L have straight shaft with
different looking bump heads. The 323c had curved shaft with
insert strings no wind up spool. All the motors look just alike.
It's my first husqvarna trimmer to work on so I know nothing.
#Post#: 71065--------------------------------------------------
Re: husqvarna 323c weedeater
By: dannyupsolate Date: April 11, 2016, 4:43 pm
---------------------------------------------------------
323L and 323c flywheel are same part number.
#Post#: 71093--------------------------------------------------
Re: husqvarna 323c weedeater
By: dannyupsolate Date: April 12, 2016, 5:30 pm
---------------------------------------------------------
great running machine. called for zama gnd 39 kit gnd 35 worked
fine. not pinching gas cable when reassembling trigger housing
hardest part of job.
*****************************************************