DIR Return Create A Forum - Home
       ---------------------------------------------------------
       Chainsaw Repair
  HTML https://chainsawrepair.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Husqvarna 
       *****************************************************
       #Post#: 71029--------------------------------------------------
       husky 77
   DIR By: echo user
       Date: April 9, 2016, 9:47 pm
       ---------------------------------------------------------
       I have an old husky 77 that it yanks pull  rope out of your hand
       when I crank it over.  it is the old one that has points  any
       ideas
       #Post#: 71031--------------------------------------------------
       Re: husky 77
   DIR By: 67L36Driver
       Date: April 10, 2016, 7:17 am
       ---------------------------------------------------------
       --- Quote from: echo user link ---
       >
       > I have an old husky 77 that it yanks pull  rope out of your
       hand when I crank it over.  it is the old one that has points
       any ideas
       >
       --- End Quote ---
       Lacking a compression release sucks on some over 60cc saws.
       Quite possibly the points are set a tad wide on the gap and
       advanced the timing.
       On some of my hard kickers (Homelite XP-1000) I leave the
       ignition off for two or three pulls with the choke set.  Turn on
       the ignition and set half choke and pull to start.  A rich
       mixture has less tendency to kick back.
       #Post#: 71032--------------------------------------------------
       Re: husky 77
   DIR By: old guy
       Date: April 10, 2016, 7:37 am
       ---------------------------------------------------------
       I have a 281 that I couldn't start for that reason so I put a D
       handle on the rope. ;)
       John
       *****************************************************
       Page 1 of 1