DIR Return Create A Forum - Home
       ---------------------------------------------------------
       Chainsaw Repair
  HTML https://chainsawrepair.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Chainsaws not listed - Gas OPE
       *****************************************************
       #Post#: 70585--------------------------------------------------
       green weedeater
       By: dannyupsolate Date: March 24, 2016, 3:53 pm
       ---------------------------------------------------------
       started with 7 of these got 6 going . all i learned is when you
       think carburetor is clean and they don't run right clean it
       again. went to 50% purple power in ultrasonic cleaner. unlike
       mtd brand I did not run into internal engine problems. number 7
       seems to be out of time but I got to work on saws now. 100%
       purple power eats on the aluminum.
       #Post#: 70595--------------------------------------------------
       Re: green weedeater
       By: 3000 FPS Date: March 24, 2016, 10:54 pm
       ---------------------------------------------------------
       Even the 50% purple power will eat the aluminum if you leave it
       in there long enough.  I never use it for carbs.
       #Post#: 70604--------------------------------------------------
       Re: green weedeater
       By: dannyupsolate Date: March 25, 2016, 10:29 am
       ---------------------------------------------------------
       yes  you are correct don't leave them in it over an hour and
       rinse in water. put together get fuel mix in quick.  my whole
       idea was to speed up process . if you gonna put on shelf a while
       spray with wd40 or similar product, inside and outside.
       *****************************************************