DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Chainsaws not listed - Gas OPE
*****************************************************
#Post#: 68804--------------------------------------------------
craftsman 18in 40 cc model 358.351810 oil pump
DIR By: banditman
Date: January 30, 2016, 8:38 pm
---------------------------------------------------------
Craftsman saw had the oil pump go out i think. The saw is not
pumping bar oil which caused it to get so hot it actually melted
a bunch of plastic under the saw clutch but i cant seem to find
a diagram that shows the pump can anybody send me a link if they
know where it is?
#Post#: 68805--------------------------------------------------
Re: craftsman 18in 40 cc model 358.351810 oil pump
DIR By: Chainsawrepair
Date: January 30, 2016, 8:56 pm
---------------------------------------------------------
Appears to be the little poulan.
HTML http://www.searspartsdirect.com/model-number/358351810/0247/1503220.html
#Post#: 68806--------------------------------------------------
Re: craftsman 18in 40 cc model 358.351810 oil pump
DIR By: Chainsawrepair
Date: January 30, 2016, 8:58 pm
---------------------------------------------------------
Oil pump kit #55 530071891
HTML http://www.searspartsdirect.com/craftsman-chainsaw-parts/530071891/0071/358/model-358351810/0247/1503220.html
HTML http://c.searspartsdirect.com/lis_png/PLDM/P0908010-00001.png
#Post#: 68807--------------------------------------------------
Re: craftsman 18in 40 cc model 358.351810 oil pump
DIR By: Chainsawrepair
Date: January 30, 2016, 9:00 pm
---------------------------------------------------------
Better prices in the 14 range new with free shipping
HTML http://www.ebay.com/sch/i.html?_from=R40&_sacat=0&_sop=15&_nkw=530071891&rt=nc&LH_ItemCondition=3&_trksid=p2045573.m1684
#Post#: 68810--------------------------------------------------
Re: craftsman 18in 40 cc model 358.351810 oil pump
DIR By: dannyupsolate
Date: January 30, 2016, 10:14 pm
---------------------------------------------------------
only one I had melt bad had been run with chainbrake on. You may
need a saw body but they are cheap and easy to change out.
#Post#: 68811--------------------------------------------------
Re: craftsman 18in 40 cc model 358.351810 oil pump
DIR By: 3000 FPS
Date: January 30, 2016, 10:36 pm
---------------------------------------------------------
Yep the only time I have seen that also was because the chain
brake was on.
#Post#: 68823--------------------------------------------------
Re: craftsman 18in 40 cc model 358.351810 oil pump
DIR By: banditman
Date: January 31, 2016, 11:42 am
---------------------------------------------------------
Guess i should have given a little history on this particular
saw. I got it from a guy who received it for a Christmas
present and in the first few minuets of owning it put bar oil in
the gas tank and gas in the bar oil tank. So it messed the saw
up pretty bad but i got it for free and its brand new so just
been rebuilding it.
#Post#: 68834--------------------------------------------------
Re: craftsman 18in 40 cc model 358.351810 oil pump
DIR By: 3000 FPS
Date: January 31, 2016, 2:15 pm
---------------------------------------------------------
Ok that should be easy to correct. Flush out fuel tank replace
filter and lines and take carb apart and spray every orifice
with some carb cleaner and get an oil pump from ebay. Then
rock and roll.
*****************************************************
Page 1 of 1