DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Dolmar Makita
*****************************************************
#Post#: 68645--------------------------------------------------
Dolmar crankshaft
By: Chainsawrepair Date: January 27, 2016, 2:37 pm
---------------------------------------------------------
Dolmar 6400 7300 7900 7910 etc cranks. Anyone seen them
cracking?
2 out of 3 were good but a 3rd one was cracked at 12 o'clock
from pin out. No pic of 3rd crank being it was no good and not
sent to me.
HTML http://i59.photobucket.com/albums/g289/doemaster789/570/dolmar7900parts%20002_zps6zzvze7d.jpg
#Post#: 68802--------------------------------------------------
Re: Dolmar crankshaft
By: Chainsawrepair Date: January 30, 2016, 7:11 pm
---------------------------------------------------------
Crank above in this crankcase now. Tractorsaw1 Glad to have
been able to help and that you had a crank I wanted too. 8)
What was wrong with the crank you replaced?
[img width=600
height=800]
HTML http://uploads.tapatalk-cdn.com/20160130/b50db703c257de099c3cd7bbfd6ba28f.jpg[/img]
#Post#: 68863--------------------------------------------------
Re: Dolmar crankshaft
By: Tractorsaw1 Date: January 31, 2016, 8:38 pm
---------------------------------------------------------
Big end bearing was bad. Didn't get to finish yet. Too much
going on
#Post#: 68976--------------------------------------------------
Re: Dolmar crankshaft
By: Chainsawr Date: February 4, 2016, 6:11 am
---------------------------------------------------------
Yes.
*****************************************************