DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Dolmar Makita
*****************************************************
#Post#: 65662--------------------------------------------------
Dolmar 120 Fuel/ leaking issues
By: weimedog Date: November 29, 2015, 12:21 pm
---------------------------------------------------------
Might as well pick brains..
Need a source of parts to freshen up the fuel line and vent
parts on an old 120 series Dolmar.. Put it on its side and it
leaks. Haven't pulled it apart yet and HOPING standard fuel
lines can help or solve its issue.. but suspect its never that
simple.
#Post#: 65700--------------------------------------------------
Re: Dolmar 120 Fuel/ leaking issues
By: 3000 FPS Date: November 29, 2015, 9:58 pm
---------------------------------------------------------
I believe the top center of the fuel tank has a plastic piece
with an o-ring where the tank vent and fuel line is connected.
That piece can sometimes leak. You will have to pull the handle
loose from the saw to get to it.
#Post#: 65722--------------------------------------------------
Re: Dolmar 120 Fuel/ leaking issues
By: weimedog Date: November 30, 2015, 1:54 pm
---------------------------------------------------------
Thank you... are those parts still available??
#Post#: 65740--------------------------------------------------
Re: Dolmar 120 Fuel/ leaking issues
By: Uncle Lee Date: November 30, 2015, 7:05 pm
---------------------------------------------------------
I had the same issue on a 116 SI and it was the plastic fitting
that
presses into the fuel tank. There is no "0" there but the
fitting is
knurled on the side to make it a press fit and seal. I had to
replace
the fitting.
Lee
#Post#: 65742--------------------------------------------------
Re: Dolmar 120 Fuel/ leaking issues
By: 3000 FPS Date: November 30, 2015, 7:11 pm
---------------------------------------------------------
Did not remember that it had no O-ring. I have seen them on
eBay for sale. Just type in the part number and it will pop
up.
*****************************************************