DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Stihl
*****************************************************
#Post#: 65455--------------------------------------------------
Stihl 660 arctic
By: jmester Date: November 24, 2015, 9:53 pm
---------------------------------------------------------
I am thinking on doing an arctic setup on one of my 660. Going
to check on pricing tomorrow. Wanted to see if they work well
and how well they hold up. I love cutting trees but I hate cold
hands.
#Post#: 65469--------------------------------------------------
Re: MS 660 arctic
By: Chainsawrepair Date: November 25, 2015, 7:37 am
---------------------------------------------------------
Never used a stihl heated handle. C heated handle, W heated
carb.
Have had it on a husky and worked fine.
I like the old school heated handles on my jonsered 490 and
partner 5000 the best. No carb heat on them, but used exhaust
to rear handle and front handle and was adjustable. I have pics
of this set up.
#Post#: 65517--------------------------------------------------
Re: MS 660 arctic
By: jmester Date: November 25, 2015, 7:05 pm
---------------------------------------------------------
I am not going to do the heated carb option just the handles.
The parts are pretty expensive. Would be better to buy one that
has the stuff on it already.
#Post#: 65592--------------------------------------------------
Re: MS 660 arctic
By: jmester Date: November 27, 2015, 8:07 pm
---------------------------------------------------------
Ordered the parts today. Most of the stuff is back ordered. The
parts guy and I where both saying around a month to get all the
pieces but I guess we will see. Think this is going to make
winter cutting a whole lot more fun.
#Post#: 65785--------------------------------------------------
Re: MS 660 arctic
By: jmester Date: December 1, 2015, 5:29 pm
---------------------------------------------------------
Found that some of the parts are all ready NLA. No surprise
really heated handles saws are not that popular at least where I
live. I will post the part numbers here in a bit. I found one of
the parts that was NLA in my parts bin brand new. I was thankful
for that. The other I found a guy in ct that had 2 of them, I
bought them. Took about 2 hours to find them on the bay.
#Post#: 65812--------------------------------------------------
Re: MS 660 arctic
By: Chainsawrepair Date: December 1, 2015, 10:11 pm
---------------------------------------------------------
No folks out west and up north in the cold. need numbers ;)
#Post#: 65824--------------------------------------------------
Re: MS 660 arctic
By: EHP Date: December 1, 2015, 11:56 pm
---------------------------------------------------------
Stihl is to of quit making the arctic saws , If you find a new
one buy it , The stihl heated works better than the husky heated
to me , but the 562 heated works not bad, the 372 heated not as
good
#Post#: 65828--------------------------------------------------
Re: MS 660 arctic
By: jmester Date: December 2, 2015, 6:16 am
---------------------------------------------------------
1110 432 9200 grommet fits on the back of the on/off switch on
most Arctic saws and regular saws like 031
076/090 on regular
ignition kill switch.
1118 432 2200 nut Mainly for Arctic saws. This nut attaches
the switch to The carb box. It has a long
Shoulder so that the end of the
switch is covered and protected.
Also could not get the 2 wire generator or the flywheel that
goes with it. But I would not say for sure that they are NLA. As
the Stihl distributer I have has never sold some of the parts
and my not be in there system in witch they say non order able
part. But my dealer called them and some of the parts they added
to there system.
#Post#: 65831--------------------------------------------------
Re: MS 660 arctic
By: Chainsawrepair Date: December 2, 2015, 7:43 am
---------------------------------------------------------
11184322200 cross ref hex nut M12 stihl 028 361 032 038 044
066 660 064 361 the newest saw. Might look at that.
Showing on 361
HTML http://www.motoculture-jean.fr/upload/pdf/MS361_MS361C.pdf
#Post#: 65832--------------------------------------------------
Re: MS 660 arctic
By: Chainsawrepair Date: December 2, 2015, 7:47 am
---------------------------------------------------------
11104329200 in stock pricey using ebay
HTML http://www.ebay.com/itm/Stihl-Parts-STIHL-GROMMET-1110-432-9200-Handheld-Equipment-STL-11104329200-/131425796185
Same place $3 but shipping must be killer.
HTML http://www.smallenginewarehouse.com/STL-11104329200.html
Pic of it.
HTML http://www.lsengineers.co.uk/grommet-stihl-part-no-1110-432-9200.html<br
/> bunch of saws listed.
*****************************************************
DIR Next Page