DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Husqvarna
*****************************************************
#Post#: 64081--------------------------------------------------
Husqvarna K960 concrete saw.
DIR By: 3000 FPS
Date: October 30, 2015, 9:31 pm
---------------------------------------------------------
Well the Husky K960 with the bad crank bearing was given up for
scrap. The customer decided it was not worth rebuilding and
bought a new one. So I asked if I could have it and so it is
now mine. I will tear it down and if the rod bearings look
good I will rebuild it. Not a bad freeby. I will to take a
few pics.
#Post#: 64087--------------------------------------------------
Re: Husqvarna K960 concrete saw.
DIR By: aclarke
Date: October 30, 2015, 10:02 pm
---------------------------------------------------------
Is that crank common to any other saw motors?
#Post#: 64088--------------------------------------------------
Re: Husqvarna K960 concrete saw.
DIR By: 3000 FPS
Date: October 30, 2015, 10:41 pm
---------------------------------------------------------
--- Quote from: aclarke link ---
>
> Is that crank common to any other saw motors?
>
--- End Quote ---
That I do not know. I have replaced the piston and cylinder on
these before but have never split the case on one. This should
be a good project and very educational for me since I work on
these things all the time.
#Post#: 64104--------------------------------------------------
Re: Husqvarna K960 concrete saw.
DIR By: Chainsawrepair
Date: October 31, 2015, 9:48 am
---------------------------------------------------------
--- Quote from: 3000 FPS link ---
>
> Well the Husky K960 with the bad crank bearing was given up
for scrap. The customer decided it was not worth rebuilding and
bought a new one. So I asked if I could have it and so it is
now mine. I will tear it down and if the rod bearings look
good I will rebuild it. Not a bad freeby. I will to take a
few pics.
>
--- End Quote ---
There have been times I wish I had picked up the newer stihl 460
version I was offered with bad topend. I dont need one but have
ran into a time or 2 since I wish I had had one.
#Post#: 64105--------------------------------------------------
Re: Husqvarna K960 concrete saw.
DIR By: Chainsawrepair
Date: October 31, 2015, 9:53 am
---------------------------------------------------------
K960 crankshaft 544983901 $200 for new oem kit with bearings
etc.
#Post#: 64106--------------------------------------------------
Re: Husqvarna K960 concrete saw.
DIR By: 3000 FPS
Date: October 31, 2015, 11:05 am
---------------------------------------------------------
--- Quote from: Cut4fun . link ---
>
> K960 crankshaft 544983901 $200 for new oem kit with bearings
etc.
>
--- End Quote ---
That is a lot cheaper than I thought it would be. If I can
rebuild this saw for less then 300.00 dollars it would be worth
it.
#Post#: 64111--------------------------------------------------
Re: Husqvarna K960 concrete saw.
DIR By: aclarke
Date: October 31, 2015, 2:24 pm
---------------------------------------------------------
Looks very close to a 576 crank. I may have a few if you wanna
post the specs, I'll check
#Post#: 64119--------------------------------------------------
Re: Husqvarna K960 concrete saw.
DIR By: 3000 FPS
Date: October 31, 2015, 5:35 pm
---------------------------------------------------------
Pic of the saw.
#Post#: 64121--------------------------------------------------
Re: Husqvarna K960 concrete saw.
DIR By: 3000 FPS
Date: October 31, 2015, 6:39 pm
---------------------------------------------------------
I took a few more pictures of the K960. I just wanted to show
the outside view of the cylinder.
Those runners coming from around the exhaust port and then to
the sides of the cylinder are the transfer ports. Just thought
you guys might be interested in seeing that.
When I take the cylinder off I will take some more pics of it to
show them better.
Click on the images to enlarge.
#Post#: 64130--------------------------------------------------
Re: Husqvarna K960 concrete saw.
DIR By: Chainsawrepair
Date: October 31, 2015, 7:28 pm
---------------------------------------------------------
Reminds me of the 576 cylinder
HTML http://www.ebay.com/itm/HUSQVARNA-576XP-CYLINDER-PISTON-KIT-OEM-KIT-51MM-PART-575257406-/141088793385
*****************************************************
Page 1 of 4
DIR Next Page