DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Husqvarna
*****************************************************
#Post#: 63730--------------------------------------------------
husqvarna 36
DIR By: Chainsawrepair
Date: October 22, 2015, 7:00 pm
---------------------------------------------------------
Had a husqvarna 36 dropped off today. Says just wants the chain
sharpened. OK I give it quick look see. Sniff how old is the
gas. Hmmmm dont know. Smells like turpentine to me. ::) Dump
gas for a look in my wide mouth jar. ewwwwwww :o
Could hear the fuel filter banging around loose in tank. No line
even there left to attach to. So I ask again you sure just a
chain sharpen? Left saw. Took number and will call back later.
:P
Wont touch till I find out.
#Post#: 63742--------------------------------------------------
Re: husqvarna 36
DIR By: aclarke
Date: October 22, 2015, 10:11 pm
---------------------------------------------------------
Too funny!
#Post#: 63766--------------------------------------------------
Re: husqvarna 36
DIR By: dannyupsolate
Date: October 23, 2015, 12:17 pm
---------------------------------------------------------
I compression test everything my arm on starter don't read
right. it can't tell difference between 110 and 90.
#Post#: 64362--------------------------------------------------
Re: husqvarna 36
DIR By: Cat-Face Timber
Date: November 3, 2015, 6:02 pm
---------------------------------------------------------
Did the guy get a new fuel line and filter?
You must work at or own a saw shop?
#Post#: 64380--------------------------------------------------
Re: husqvarna 36
DIR By: Chainsawrepair
Date: November 3, 2015, 8:02 pm
---------------------------------------------------------
--- Quote from: Cat-Face Timber link ---
>
> Did the guy get a new fuel line and filter?
> You must work at or own a saw shop?
>
>
--- End Quote ---
Just on the side from my real job. My own place pick and choose
what I want to work on. ;)
Still hasnt called back and moved the saw today matter of fact.
Good looking saw for a 36.
#Post#: 64389--------------------------------------------------
Re: husqvarna 36
DIR By: Eccentric
Date: November 4, 2015, 2:34 am
---------------------------------------------------------
I have a cherry looking, low time 36 with a BAD air leak. Will
replace the seals, intake boot, and impulse grommet when I get
around to it....
#Post#: 64400--------------------------------------------------
Re: husqvarna 36
DIR By: 3000 FPS
Date: November 4, 2015, 9:49 am
---------------------------------------------------------
I see that kind thing all the time also. But what they will do
is dump the fuel before they bring it in, but you cannot get rid
of that smell of bad gas. Soon as you pop the cap off the
fuel tank it knocks you over.
When I find the gas bad, fuel lines bad, then usually the carb
is going to be bad also. It just messes up all the rubber
parts.
#Post#: 64432--------------------------------------------------
Re: husqvarna 36
DIR By: Chainsawrepair
Date: November 4, 2015, 6:04 pm
---------------------------------------------------------
Finally. Got a go ahead as long as just lines etc. if carb needs
touched get hold of first. Thats a start.
I just want to get it running before I touch the chain it came
in for.
#Post#: 64475--------------------------------------------------
Re: husqvarna 36
DIR By: Chainsawrepair
Date: November 5, 2015, 4:23 pm
---------------------------------------------------------
Remove carb and ran the fuel line today in 36.
Done using that LP1200 small line. When it went through carb
base and then through the smaller tank hole. After pulled
through it didnt regain it's shape. Using the tygon 4040 from
now on for the small line.
Tuned carb to my mix all seems ok now. Thought she was going to
need a kit but once I worked on the L and I and got the old fuel
out of her it seemed fine.
Took a couple pics. Later on those.
#Post#: 64532--------------------------------------------------
Re: husqvarna 36
DIR By: Chainsawrepair
Date: November 6, 2015, 1:18 pm
---------------------------------------------------------
What is this saws cc? Guessing 36cc heart by poulan?
[URL=
HTML http://s59.photobucket.com/user/doemaster789/media/Projects/h36s029s180%20002_zps9tpx67z8.jpg.html]http://i59.photobucket.com/albums/g289/doemaster789/Projects/h36s029s180%20002_zps9tpx67z8.jpg[/URL]
[URL=
HTML http://s59.photobucket.com/user/doemaster789/media/Projects/h36s029s180%20003_zpsvyqiqjco.jpg.html]http://i59.photobucket.com/albums/g289/doemaster789/Projects/h36s029s180%20003_zpsvyqiqjco.jpg[/URL]
[URL=
HTML http://s59.photobucket.com/user/doemaster789/media/Projects/h36s029s180%20006_zpsfbebnp4f.jpg.html]http://i59.photobucket.com/albums/g289/doemaster789/Projects/h36s029s180%20006_zpsfbebnp4f.jpg[/URL]
*****************************************************
Page 1 of 2
DIR Next Page