DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Modified Ported Work or Race saws
*****************************************************
#Post#: 64399--------------------------------------------------
Re: Hot 346
By: 3000 FPS Date: November 4, 2015, 9:42 am
---------------------------------------------------------
The welding the machining and the burr work on those ports.
Very nice. Then like you mentioned you have to come up with
the design. Heck I would not have a clue on where to start.
#Post#: 64880--------------------------------------------------
Re: Hot 346
By: David Young Date: November 13, 2015, 11:15 am
---------------------------------------------------------
wow thank you for sharing that is a great concept and amazing
work!
#Post#: 64894--------------------------------------------------
Re: Hot 346
By: The Ripper Date: November 13, 2015, 6:56 pm
---------------------------------------------------------
The workmanship on that hot saw is absolutely beautiful and the
barrier finish in those ports is amazing and ideal ;)
#Post#: 64900--------------------------------------------------
Re: Hot 346
By: 604f_1 Date: November 13, 2015, 9:19 pm
---------------------------------------------------------
Thanks a lot guys ! I am also building another 54cc for stock
appearing (some out of the box thinking also ) and I may add a
couple pics as progress goes if you guys care ...
#Post#: 64903--------------------------------------------------
Re: Hot 346
By: aclarke Date: November 13, 2015, 11:33 pm
---------------------------------------------------------
Always like to see interesting ideas and nice clean work!!
#Post#: 66259--------------------------------------------------
Re: Hot 346
By: ej Date: December 12, 2015, 12:58 pm
---------------------------------------------------------
Nice looking piston you selling those pistons
#Post#: 66260--------------------------------------------------
Re: Hot 346
By: 604f_1 Date: December 12, 2015, 1:34 pm
---------------------------------------------------------
I made 5 sold 2 and will keep the 3 left . They're smaller than
they look btw 42,5mm !
#Post#: 66269--------------------------------------------------
Re: Hot 346
By: ej Date: December 12, 2015, 5:34 pm
---------------------------------------------------------
you made them there not wiseco pistons?
#Post#: 66277--------------------------------------------------
Re: Hot 346
By: 604f_1 Date: December 12, 2015, 6:57 pm
---------------------------------------------------------
I've never run the wiseco stuff , except for the rings . I
machine my own out of 4032 , it allows me to run tighter
clearence , its more scuff and wear resistant , etc
#Post#: 66289--------------------------------------------------
Re: Hot 346
By: ej Date: December 13, 2015, 7:59 am
---------------------------------------------------------
Nice looking piston anyways
*****************************************************
DIR Previous Page
DIR Next Page