DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Poulan
*****************************************************
#Post#: 4724--------------------------------------------------
Craftsman 358.356070 3.0
DIR By: Chainsawrepair
Date: November 5, 2011, 10:40 pm
---------------------------------------------------------
I was able to start taking my new to me project saw apart this
evening. Model # 358356070 - Craftsman 3.0 18 in.
So far just pulled all the AV's to see which ones were needing
replaced.
Mount PART NUMBER: 27238 Substitution: 530027393
Isolator PART NUMBER: 27236 Substitution: 530042080
IPL
HTML http://parts.sears.com/partsdirect/part-model/Craftsman-Parts/Chainsaw-Parts/Model-358356070/0247/1503220;jsessionid=o2KVwLKD9h-5Y-zp0sO43A**.pdapp402vert1
#Post#: 4747--------------------------------------------------
Re: Craftsman 358.356070 = grey Poulan 3000
DIR By: Modifiedmark
Date: November 6, 2011, 9:30 pm
---------------------------------------------------------
Kevin, pull the muffler on that to verify for me that the
Craftsman 3.0 versions were all unplated cyls will you?
#Post#: 4748--------------------------------------------------
Re: Craftsman 358.356070 = grey Poulan 3000
DIR By: Chainsawrepair
Date: November 7, 2011, 5:39 am
---------------------------------------------------------
I got a little further yesterday tearing down and checking over
very slowly. Will pull muffler.
Looked through plug hole yesterday and carb looking at intake
side of piston and exhaust side of cyl. Looks good so far.
#Post#: 4752--------------------------------------------------
Re: Craftsman 358.356070 = grey Poulan 3000
DIR By: Chainsawrepair
Date: November 7, 2011, 7:11 pm
---------------------------------------------------------
Mark pulled muffler and it was darker grey inside cylinder.
Does this mean a plated piston then?
Would the 3300 saws all look like this I wonder too. I haven't
looked in the 3300 I picked up or the one my dad bought new in
80's.
UPDATE: Yes bare bore and plated piston on the 3.0 grey 3000 ;)
;D and 3300
#Post#: 4765--------------------------------------------------
Re: Craftsman 358.356070 = grey Poulan 3000
DIR By: Cut4fun
Date: November 9, 2011, 4:47 pm
---------------------------------------------------------
Got the new front AV in. Had rest of AV parts on hand and
installed. Ran new impulse, tank vent and fuel lines. Being the
old ones crumbed at my touch. Gutted muffler and didnt even have
to rebuild carb. Runs great, oiler works and ready for it's test
session in the woods.
Thanks for the trade ;), this is a saw I understand and can
use.
#Post#: 4768--------------------------------------------------
Re: Craftsman 358.356070 = grey Poulan 3000
DIR By: Al Smith
Date: November 9, 2011, 6:13 pm
---------------------------------------------------------
Like I said that one was what my little bud went in the tree biz
with maybe 20 years ago .That saw, a pick up with a set of
plywood sides and a set of gaffs and a belt . He's came a long
way since .
#Post#: 4771--------------------------------------------------
Re: Craftsman 358.356070 = grey Poulan 3000
DIR By: Chainsawrepair
Date: November 9, 2011, 6:41 pm
---------------------------------------------------------
--- Quote from: Al Smith link ---
>
> Like I said that one was what my little bud went in the tree
biz with maybe 20 years ago .That saw, a pick up with a set of
plywood sides and a set of gaffs and a belt . He's came a long
way since .
>
--- End Quote ---
I found a oem factory dated sticker on it for 1985.
#Post#: 4782--------------------------------------------------
Re: Craftsman 358.356070 = grey Poulan 3000
DIR By: Al Smith
Date: November 9, 2011, 7:40 pm
---------------------------------------------------------
That would be about right .He bought it second hand from a tree
service he used to work for . As it turned out the owner of said
business is now his foremen on the jobs .
As he got some more money he did end up with a few more saws
namely a little Echo trim saw and an 038 mag both of which I
own now .Geeze I kept the Stihl running for 10 years on a wing
and a prayer .I became so familar with that saw I could
disassemble it blindfolded .Still runs though and runs well
---for a moment . ;D
#Post#: 4805--------------------------------------------------
Re: Craftsman 358.356070 = grey Poulan 3000
DIR By: Cut4fun
Date: November 10, 2011, 6:32 pm
---------------------------------------------------------
Test cuts made. Good to go. 8)
#Post#: 8922--------------------------------------------------
Re: Craftsman 358.356070 = grey Poulan 3000
DIR By: Old Iron Logging
Date: May 1, 2012, 3:53 pm
---------------------------------------------------------
What is the bar mount for this saw? A041? Have one at the shop
in mint con that needs a bar.
*****************************************************
Page 1 of 6
DIR Next Page