DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Jonsered
*****************************************************
#Post#: 12545--------------------------------------------------
Re: Jonsered 590
By: Chainsawrepair Date: October 28, 2012, 8:12 am
---------------------------------------------------------
Found a NOS jred 590 cylinder in the style that I really like.
Only thing I am out of 590 45mm pistons.
This was the reason why I was wanting a look at that 535 45mm
piston closer. ;D
#Post#: 12610--------------------------------------------------
Re: Jonsered 590
By: farmboy Date: October 31, 2012, 7:54 am
---------------------------------------------------------
Good luck on finding a 535 piston. I picked up a clean kooking
535 thought it just needed a ring. Not so piston was almost
paper thin on the intake skirt. Husky 51 45mm fits with a
little work. Shortened skirts. Only problem is the 535 con rod
is (if I remember correctly) .010 narrower than the Husky 51 con
rod. I can get you some measurements if you need.
Shep
#Post#: 12617--------------------------------------------------
Re: Jonsered 590
By: Cut4fun Date: October 31, 2012, 1:00 pm
---------------------------------------------------------
This one looks like a easy direct swap.
husky 350 353
HTML http://www.ebay.com/itm/Husqvarna-350-353-piston-and-rings-assembly-45mm-/271080548720?pt=LH_DefaultDomain_0&hash=item3f1da8e970
I also wonder about the specs on these.
dolmar 112 113 114 116
HTML http://www.ebay.com/itm/Sachs-Dolmar-45MM-Piston-Assy-114-132-000-114132000-OEM-Fits-112-113-114-116-/130625572787?pt=LH_DefaultDomain_0&hash=item1e69e40fb3
alpina 52 500 510 55
HTML http://www.ebay.com/itm/Piston-Kit-fit-ALPINA-VIP-52-500-510-Star-55-CASTOR-52-45mm-Kolben-/170915005591?pt=LH_DefaultDomain_0&hash=item27cb540497
#Post#: 12620--------------------------------------------------
Re: Jonsered 590
By: Chainsawrepair Date: October 31, 2012, 1:51 pm
---------------------------------------------------------
The original box this 590 cylinder is in shows it was $138.80
back in it's day new.
#Post#: 12625--------------------------------------------------
Re: Jonsered 590
By: Old Iron Logging Date: October 31, 2012, 4:03 pm
---------------------------------------------------------
152 Efco has a 45mm piston and 10mm pin I think.
#Post#: 12626--------------------------------------------------
Re: Jonsered 590
By: Chainsawrepair Date: October 31, 2012, 4:16 pm
---------------------------------------------------------
[quote author=Old Iron Logging link=topic=50.msg12625#msg12625
date=1351717428]
152 Efco has a 45mm piston and 10mm pin I think.
[/quote]
Thanks. Liking the husky one still
Efco 152 Oleo-mac 952
HTML http://www.ebay.com/itm/EFCO-152-952-OLEO-MAC-952-CHAINSAW-PISTON-45mm-/330726902403?pt=LH_DefaultDomain_2&hash=item4d00dc0a83
#Post#: 12631--------------------------------------------------
Re: Jonsered 590
By: SawTroll Date: October 31, 2012, 9:03 pm
---------------------------------------------------------
Is that one for an open port cylinder?
#Post#: 12636--------------------------------------------------
Re: Jonsered 590
By: Cut4fun Date: November 1, 2012, 6:04 am
---------------------------------------------------------
[quote author=SawTroll link=topic=50.msg12631#msg12631
date=1351735413]
Is that one for an open port cylinder?
[/quote]
Which piston and who you asking? ???
#Post#: 12664--------------------------------------------------
Re: Jonsered 590
By: Chainsawrepair Date: November 3, 2012, 4:02 pm
---------------------------------------------------------
Just sharing some more pics.
Here is a used 590 45mm piston used compared to the 325 5500
46mm piston new.
[IMG]
HTML http://i59.photobucket.com/albums/g289/doemaster789/034036/Copyof590piston.jpg[/img]
[IMG]
HTML http://i59.photobucket.com/albums/g289/doemaster789/034036/Copyofpp325p.jpg[/img]
Used 590 top and the new 590 top with different views. I didn't
get a lot of used 590 before trading it off.
[IMG]
HTML http://i59.photobucket.com/albums/g289/doemaster789/034036/Copyof590cylinder.jpg[/img]
[IMG]
HTML http://i59.photobucket.com/albums/g289/doemaster789/034036/036cp590c008.jpg[/img]
[IMG]
HTML http://i59.photobucket.com/albums/g289/doemaster789/034036/036cp590c009.jpg[/img]
[IMG]
HTML http://i59.photobucket.com/albums/g289/doemaster789/034036/036cp590c001.jpg[/img]
[IMG]
HTML http://i59.photobucket.com/albums/g289/doemaster789/034036/036cp590c012.jpg[/img]
#Post#: 12718--------------------------------------------------
Re: Jonsered 590
By: SawTroll Date: November 5, 2012, 12:52 pm
---------------------------------------------------------
The Efco one, that isn't windowed. ;)
*****************************************************
DIR Previous Page
DIR Next Page